{
  "url": "https://openlegislation.uk/eu-regulation-2008-692/annex-II/appendix-2",
  "json_url": "https://openlegislation.uk/eu-regulation-2008-692/annex-II/appendix-2.json",
  "legislation": "eur/2008/692",
  "legislation_title": "Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2008-692",
  "path": "annex/II/appendix/2",
  "kind": "appendix",
  "number": "2",
  "heading": null,
  "text": "Statistical procedure for tailpipe emissions in-service conformity testing\n1.\nThis procedure shall be used to verify the in-service conformity requirements for the type 1 test. The applicable statistical method set out in Appendix 4 to UN/ECE Regulation No 83 shall apply, with the exceptions described in the Sections 2 to 9 of this Appendix.\n2.\nNote 1 shall not apply.\n3.\nPoint 3.2 shall be understood as follows:\nA vehicle is said to be an outlying emitter when the conditions given in point 3.2.2 are met.\n4.\nPoint 3.2.1 shall not apply.\n5.\nIn point 3.2.2, the reference to row B of the table in point 5.3.1.4 shall be understood as reference to Table 1 of Annex I to Regulation (EC) No 715/2007 for Euro 5 vehicles and to Table 2 of Annex I to Regulation (EC) No 715/2007 for Euro 6 vehicles.\n6.\nIn points 3.2.3.2.1 and 3.2.4.2, the reference to Section 6 of Appendix 3 shall be understood as reference to Section 6 of Appendix 1 to Annex II to this Regulation.\n7.\nIn notes 2 and 3, the reference to row A of the table in point 5.3.1.4 shall be understood as reference to Table 1 of Annex I to Regulation (EC) No 715/2007 for Euro 5 vehicles and to Table 2 of Annex I to Regulation (EC) No 715/2007 for Euro 6 vehicles.\n8.\nIn point 4.2, the reference to point 5.3.1.4 shall be understood as reference to Table 1 of Annex I to Regulation (EC) No 715/2007 for Euro 5 vehicles and Table 2 of Annex I to Regulation (EC) No 715/2007 for Euro 6 vehicles.\n9.\nFigure 4/1 shall be replaced by the following figure:\n‘ Figure 4/1 ’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Substituted by Commission Regulation (EU) No 566/2011 of 8 June 2011 amending Regulation (EC) No 715/2007 of the European Parliament and of the Council and Commission Regulation (EC) No 692/2008 as regards access to vehicle repair and maintenance information (Text with EEA relevance)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2008/692/annex/II/appendix/2",
    "retrieved_at": "2026-11-01T14:52:09.943760+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}