{
  "url": "https://openlegislation.uk/eu-regulation-2008-692/annex-XIII/appendix-1",
  "json_url": "https://openlegislation.uk/eu-regulation-2008-692/annex-XIII/appendix-1.json",
  "legislation": "eur/2008/692",
  "legislation_title": "Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2008-692",
  "path": "annex/XIII/appendix/1",
  "kind": "appendix",
  "number": "1",
  "heading": "MODEL",
  "text": "The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.\nIf the systems, components or separate technical units have electronic controls, information concerning their performance must be supplied.\n0.\nGENERAL\n0.1.\nMake (trade name of manufacturer):\n0.2.\nType:\n0.2.1.\nCommercial name(s), if available:\n0.5.\nName and address of manufacturer:\nName and address of authorised representative, if any:\n0.7.\nIn the case of components and separate technical units, location and method of affixing of the EC approval mark:\n0.8.\nAddress(es) of assembly plant(s):\n1.\nDESCRIPTION OF THE DEVICE\n1.1.\nMake and type of the replacement pollution control device:\n1.2.\nDrawings of the replacement pollution control device, identifying in particular all the characteristics referred to under point 8 of Article 2 of [this Regulation]:\n1.3.\nDescription of the vehicle type or types for which the replacement pollution control device is intended:\n1.3.1.\nNumber(s) and/or symbol(s) characterising the engine and vehicle type(s):\n1.3.2.\nIs the replacement pollution control device intended to be compatible with OBD requirements (Yes/No)\n1.4.\nDescription and drawings showing the position of the replacement pollution control device relative to the engine exhaust manifold(s):",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "Delete where not applicable"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2008/692/annex/XIII/appendix/1",
    "retrieved_at": "2026-11-01T14:52:09.943760+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}