# Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance), Division 2.2: Documentation

Extent: E+W+S+N.I.

Original replacement pollution control devices shall be accompanied by the following information:
(a) the vehicle manufacturer’s name or trade mark;
(b) the make and identifying part number of the original replacement pollution control device as recorded in the information mentioned in point 2.3;
(c) the vehicles for which the original replacement pollution control device is of a type covered by point 2.3 of the Addendum to Appendix 4 to Annex I, including, where applicable, a marking to identify if the original replacement pollution control device is suitable for fitting to a vehicle that is equipped with an on-board diagnostic (OBD) system;
(d) installation instructions, where necessary.
This information shall be available in the product catalogue distributed to points of sale by the vehicle manufacturer.

---
Source: https://www.legislation.gov.uk/eur/2008/692/annex/XIII/division/2/division/2.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2008-692/annex-XIII/division-2/division-2.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.