# Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance), Division

Extent: E+W+S+N.I.

On the basis of the audit referred to in Section 1.2 the approval authority shall adopt one of the following decisions and actions:
(a) decide that the in-service conformity of a vehicle type or a vehicle in-service family is satisfactory and not take any further action;
(b) decide that the data provided by the manufacturer is insufficient to reach a decision and request additional information or test data from the manufacturer;
(c) decide that the in-service conformity of a vehicle type, that is part of an in-service family, is unsatisfactory and proceed to have such vehicle type tested in accordance with Appendix 1 to Annex I.
Where the manufacturer has been permitted not to carry out an audit for a particular vehicle type in accordance with Section 2, the approval authority may proceed to have such vehicle types tested in accordance with Appendix 1 to Annex I.

---
Source: https://www.legislation.gov.uk/eur/2008/692/annex/XV/division/3/division/1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2008-692/annex-XV/division-3/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.