# Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance), Division 3.4

Extent: E+W+S+N.I.

Where the approval authority is not satisfied with the results of the tests in accordance with the criteria defined in Appendix 2, the remedial measures referred to to in Article 11(2) and in Annex X to Directive 70/156/EEC are extended to vehicles in service belonging to the same vehicle type which are likely to be affected with the same defects in accordance with section 6 of Appendix 1.
The plan of remedial measures presented by the manufacturer shall be approved by the approval authority. The manufacturer is responsible for the execution of the remedial plan as approved.
The approval authority shall notify its decision to all Member States within 30 days. The Member States may require that the same plan of remedial measures be applied to all vehicles of the same type registered in their territory.

---
Source: https://www.legislation.gov.uk/eur/2008/692/annex/XV/division/3/division/3.4 (the official version)
Page: https://openlegislation.uk/eu-regulation-2008-692/annex-XV/division-3/division-3.4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.