{
  "url": "https://openlegislation.uk/eu-regulation-2008-692/article-11",
  "json_url": "https://openlegislation.uk/eu-regulation-2008-692/article-11.json",
  "legislation": "eur/2008/692",
  "legislation_title": "Commission Regulation (EC) No 692/2008 of 18 July 2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2008-692",
  "path": "article/11",
  "kind": "article",
  "number": "11",
  "heading": "Application for EC type-approval of a type of replacement pollution control device as a separate technical unit",
  "text": "1. The manufacturer shall submit to the approval authority an application for EC type-approval of a type of replacement pollution control device as a separate technical unit.\nThe application shall be drawn up in accordance with the model of the information document set out in Appendix 1 to Annex XIII.\n2. In addition to the requirements laid down in paragraph 1, the manufacturer shall submit to the technical service responsible for the type-approval test the following:\n(a) a vehicle or vehicles of a type approved in accordance with this Regulation equipped with a new original equipment pollution control device\n(b) one sample of the type of the replacement pollution control device\n(c) an additional sample of the type of the replacement pollution control device, in the case of a replacement pollution control device intended to be fitted to a vehicle equipped with an OBD system.\n3. For the purposes of paragraph 2(a), the test vehicles shall be selected by the applicant with the agreement of the technical service.\nThe test vehicles shall comply with the requirements set out in Section 3.1 of Annex 4 to UN/ECE Regulation 83.\nThe test vehicles shall respect the following requirements:\n(a) they shall have no emission control system defects;\n(b) any excessively worn out or malfunctioning emission-related original part shall be repaired or replaced;\n(c) they shall be tuned properly and set to manufacturer’s specification prior to emission testing.\n4. For the purposes of points (b) and (c) of paragraph 2, the sample shall be clearly and indelibly marked with the applicant’s trade name or mark and its commercial designation.\n5. For the purposes of paragraph 2(c), the sample shall have been deteriorated as defined under point 25 of Article 2.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2008/692/article/11",
    "retrieved_at": "2026-11-01T14:52:09.943760+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}