{
  "url": "https://openlegislation.uk/eu-regulation-2009-1222/annex-V/division-4/division-4.1/division-4.1.5/division-4.1.5.1",
  "json_url": "https://openlegislation.uk/eu-regulation-2009-1222/annex-V/division-4/division-4.1/division-4.1.5/division-4.1.5.1.json",
  "legislation": "eur/2009/1222",
  "legislation_title": "Regulation (EC) No 1222/2009 of the European Parliament and of the Council of 25 November 2009 on the labelling of tyres with respect to fuel efficiency and other essential parameters (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2009-1222",
  "path": "annex/V/division/4/division/4.1/division/4.1.5/division/4.1.5.1",
  "kind": "division",
  "number": "4.1.5.1",
  "heading": "Test run",
  "text": "The following test procedure applies for each test run:\n(1) The passenger car is driven in a straight line up to 85 ± 2 km/h.\n(2) Once the passenger car has reached 85 ± 2 km/h, the brakes are always activated at the same place on the test track referred to as ‘ braking starting point ’ , with a longitudinal tolerance of 5 m and a transverse tolerance of 0,5 m.\n(3) The brakes are activated either automatically or manually.\n(i) The automatic activation of the brakes is performed by means of a detection system made of two parts, one indexed to the test track and one on board the passenger car.\n(ii) The manual activation of the brakes depends on the type of transmission as follows. In both cases, a minimum of 600 N pedal efforts is required.\nFor manual transmission, the driver should release the clutch and depress the brake pedal sharply, holding it down as long as necessary to perform the measurement.\nFor automatic transmission, the driver should select neutral gear and then depress the brake pedal sharply, holding it down as long as necessary to perform the measurement.\n(4) The average deceleration is calculated between 80 km/h and 20 km/h.\nIf any of the specifications listed above (including speed tolerance, longitudinal and transverse tolerance for the braking starting point, and braking time) are not met when a test run is made, the measurement is discarded and a new test run is made.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Inserted by Commission Regulation (EU) No 228/2011 of 7 March 2011 amending Regulation (EC) No 1222/2009 of the European Parliament and of the Council with regard to the wet grip testing method for C1 tyres (Text with EEA relevance)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2009/1222/annex/V/division/4/division/4.1/division/4.1.5/division/4.1.5.1",
    "retrieved_at": "2026-11-01T14:51:03.606681+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}