# Regulation (EC) No 1222/2009 of the European Parliament and of the Council of 25 November 2009 on the labelling of tyres with respect to fuel efficiency and other essential parameters (Text with EEA relevance), Division 4.1.5.2: Test cycle

Extent: E+W+S+N.I.

A number of test runs are made in order to measure the wet grip index of a set of candidate tyres (T) according to the following procedure, whereby each test run shall be made in the same direction and up to three different sets of candidate tyres may be measured within the same test cycle:
(1) First, the set of reference tyres are mounted on the instrumented passenger car.
(2) After at least three valid measurements have been made in accordance with section 4.1.5.1, the set of reference tyres is replaced by a set of candidate tyres.
(3) After six valid measurements of the candidate tyres are performed, two more sets of candidate tyres may be measured.
(4) The test cycle is closed by three more valid measurements of the same set of reference tyres as at the beginning of the test cycle.

---
Source: https://www.legislation.gov.uk/eur/2009/1222/annex/V/division/4/division/4.1/division/4.1.5/division/4.1.5.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2009-1222/annex-V/division-4/division-4.1/division-4.1.5/division-4.1.5.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

