# Regulation (EC) No 1222/2009 of the European Parliament and of the Council of 25 November 2009 on the labelling of tyres with respect to fuel efficiency and other essential parameters (Text with EEA relevance), Division 4.1.6.2: Validation of results

Extent: E+W+S+N.I.

The AD coefficient of variation is calculated as follows:
(Standard Deviation / Average) × 100
For the reference tyres ( R ) If the AD coefficient of variation of any two consecutive groups of three test runs of the reference tyre set is higher than 3 %, all data should be discarded and the test repeated for all test tyres (the candidate tyres and the reference tyres).
For the candidate tyres ( T ) The AD coefficients of variation are calculated for each candidate tyre set. If one coefficient of variation is higher than 3 %, the data should be discarded and the test repeated for that candidate tyre set.

---
Source: https://www.legislation.gov.uk/eur/2009/1222/annex/V/division/4/division/4.1/division/4.1.6/division/4.1.6.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2009-1222/annex-V/division-4/division-4.1/division-4.1.6/division-4.1.6.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

