# Commission Regulation (EU) No 1266/2009 of 16 December 2009 adapting for the tenth time to technical progress Council Regulation (EEC) No 3821/85 on recording equipment in road transport (Text with EEA relevance) (repealed) EU Regulation No 1266/2009 · adopted 16 December 2009 Commission Regulation (EU) No 1266/2009 of 16 December 2009 adapting for the tenth time to technical progress Council Regulation (EEC) No 3821/85 on recording equipment in road transport (Text with EEA relevance) (repealed) PDFs: Printed copy https://openlegislation.uk/eu-regulation-2009-1266/pdf/eur_20091266_adopted_en.pdf ## Introductory text Commission Regulation (EU) No 1266/2009 of 16 December 2009 adapting for the tenth time to technical progress Council Regulation (EEC) No 3821/85 on recording equipment in road transport (Text with EEA relevance) (repealed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 1: AMENDMENTS TO CHAPTER I (DEFINITIONS) ## 1.1 The definition (f) is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 1.2 The definition (l) is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 1.3 The definition (s) is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 1.4 In footnote (1) to definitions ‘n’ and ‘p’ the following paragraph is added: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 2: AMENDMENTS TO CHAPTER II (GENERAL CHARACTERISTICS) ## 2.1 The following new Requirement is inserted after Requirement 001: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 2.2 Requirement 010 is amended as follows: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 2.3 The second indent of Requirement 011 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 3: AMENDMENTS TO CHAPTER III (FUNCTIONS AND REQUIREMENTS) ## 3.1 The following requirement is inserted after Requirement 019: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.2 Requirement 028 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.3 Requirement 029 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.5 Requirement 038, Requirement 041 and Requirement 042 are replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.6 Requirements 050, 050a and 050b are replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.7 Requirement 065 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.8 The following text is inserted after Requirement 067: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.9 In Requirement 094 the following line is inserted after ‘motion data error’ event: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.10 Requirement 104 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.11 After Requirement 109a, the following requirement is inserted: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.12 Requirement 114a is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.13 Requirement 121 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.14 Requirement 127 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.15 Requirement 133a is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.16 Requirement 136 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.17 The following requirements are inserted after Requirement 136: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.18 Requirement 141 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.19 Requirement 145 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 3.20 After Requirement 161, the following requirement is inserted: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 4: AMENDMENTS TO CHAPTER V (INSTALLATION) ## 4.1 Requirement 239 shall have the following sentence added: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 4.2 Requirement 243 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 4.3 Requirement 248 and Requirement 249 are replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 4.4 Requirement 250, sixth indent is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 4.5 After Requirement 250 the following requirement is inserted: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 5: AMENDMENTS TO CHAPTER VI (INSPECTIONS) ## 5.1 Requirement 257 is amended as follows: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 5.2 The following requirements are inserted after Requirement 257: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 6: AMENDMENTS TO CHAPTER VII (CARD ISSUING) ## 6.1 The following requirement is inserted after Requirement 268: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 7: AMENDMENTS TO CHAPTER VIII (TYPE-APPROVAL) ## 7.1 In Section 1 General Points, a new sentence is added to the first paragraph: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 7.2 After Requirement 274, the following requirements are inserted: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 7.3 After Requirement 275, the following requirement is inserted: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 7.4 After Requirement 277, the following requirement is inserted: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 7.5 Requirement 281 is replaced by: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 8: AMENDMENTS TO APPENDIX 1 (DATA DICTIONARY) ## 8.1 Section 2.2 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 8.2 In Section 2.54, the line ‘ “0A”H to “0F”H RFU’, is replaced by: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 8.3 Section 2.70 is replaced with the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 8.4 Section 2.114 is replaced with the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 8.5 The last paragraph of Chapter 4 is replaced by the following text: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 8.6 In Chapter 2, Section 2.67 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 8.7 Section 2.71 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 8.8 Section 2.72 is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 9: AMENDMENTS TO APPENDIX 3 (PICTOGRAMS) ## 9.1 Requirement PIC_001 is replaced by: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 9.2 Section 2, in the ‘Events’ sub-sub section, the following pictogram is added: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 10: AMENDMENTS TO APPENDIX 4 (PRINTOUTS) ## 10.1 PRT_006 in Section 2, Data Block Specification, is replaced by: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 10.2 Section 3.1. Driver Activities from daily card printout is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 10.3 Section 3.2 Driver Activities from daily VU printout is replaced by: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 11: AMENDMENTS TO APPENDIX 7 (DATA DOWNLOADING PROTOCOL) ## 11.1 The footnote in section 2.1 associated with download procedure, is replaced by the following: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ### Division 12: AMENDMENTS TO APPENDIX 9 (TYPE APPROVAL – LIST OF MINIMUM REQUIRED TESTS) ## 12.1 In Chapter I the following ISO standard is added to the first paragraph: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 12.2 In Chapter II VEHICLE UNIT FUNCTIONAL TESTS, the following new requirement is added to Section 3 of the Functional Tests to be carried out: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 12.3 In Chapter II the following new requirement is added: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 12.4 In Chapter III the following new requirement is added: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 12.5 In Chapter III MOTION SENSOR FUNCTIONAL TESTS, the following new requirement is added to Section 3 of the Functional Tests to be carried out: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ## 13 AMENDMENTS TO APPENDIX 12 (ADAPTOR FOR M1 and N1 VEHICLES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . --- Source: https://www.legislation.gov.uk/eur/2009/1266 (the official version) Page: https://openlegislation.uk/eu-regulation-2009-1266 Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.