# Commission Regulation (EC) No 152/2009 of 27 January 2009 laying down the methods of sampling and analysis for the official control of feed (Text with EEA relevance), Division: Notes:

Extent: E+W+S+N.I.

(a)In determining trace elements it is important to be alert to the risks of contamination, particularly by zinc, copper and iron. For this reason, the equipment used in preparing the samples must be free of these metals.
To reduce the general risk of contamination, work in a dust-free atmosphere with scrupulously clean equipment and carefully washed glassware. The determination of zinc is particularly sensitive to many types of contamination, e.g. from glassware, reagents, dust, etc.
(b)The weight of sample to be ashed is calculated from the approximate trace element content of the feed in relation to the sensitivity of the spectrophotometer used. For certain feed low in trace elements it may be necessary to start with a 10 to 20 g sample and make up the final solution to only 100 ml.
(c)Ashing must be carried out in a closed furnace without injection of air or oxygen.
(d)The temperature indicated by the pyrometer must not exceed 475 oC.

---
Source: https://www.legislation.gov.uk/eur/2009/152/annex/IV/division/C/division/5/division/5.1/division/5.1.1/division/5.1.1.2/annotation/1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2009-152/annex-IV/division-C/division-5/division-5.1/division-5.1.1/division-5.1.1.2/annotation/1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

