Division [9A350] Spraying or fogging systems, specially designed or modified for fitting to aircraft, "lighter-than-air vehicles" or “Unmanned Aerial Vehicles” (“UAVs”), and specially designed components therefor, as follows:F1F2
- a..
Complete spraying or fogging systems capable of delivering, from a liquid suspension, an initial droplet ‘VMD’ of less than 50 μm at a flow rate of greater than two litres per minute;
- b..
Spray booms or arrays of aerosol generating units capable of delivering, from a liquid suspension, an initial droplet ‘VMD’ of less than 50 μm at a flow rate of greater than two litres per minute;
- c..
Aerosol generating units specially designed for fitting to systems specified in 9A350.a. and.b.
Note:
Aerosol generating units are devices specially designed or modified for fitting to aircraft such as nozzles, rotary drum atomizers and similar devices.
Note:
9A350 does not control spraying or fogging systems and components that are demonstrated not to be capable of delivering biological agents in the form of infectious aerosols.
Technical Notes:
1.
Droplet size for spray equipment or nozzles specially designed for use on aircraft, "lighter-than-air vehicles" or unmanned aerial vehicles should be measured using either of the following:
- a..
Doppler laser method;
- b..
Forward laser diffraction method.
2.
In 9A350 ‘VMD’ means Volume Median Diameter and for water-based systems this equates to Mass Median Diameter (MMD).
Annotations
Textual amendments
- F1
- F2
Words in Annex 1 Entry 9A350 substituted (16.12.2025) by The Export Control (Amendment) (No. 2) Regulations 2025 (S.I. 2025/1197), regs. 1(2), 13(f)