Division [9B106] Environmental chambers and anechoic chambers, as follows:F1
- a..
Environmental chambers having all of the following:
- 1..
Capable of simulating any of the following flight conditions:
- a..
Altitude equal to or greater than 15 km; or
- b..
Temperature range from below 223 K (– 50°C) to above 398 K (125°C); and
- a..
- 2..
Incorporating, or ‘designed or modified’ to incorporate, a shaker unit or other vibration test equipment to produce vibration environments equal to or greater than 10 g rms, measured ‘bare table’, between 20 Hz and 2 kHz while imparting forces equal to or greater than 5 kN;
Technical Notes:
1.
9B106.a.2. describes systems that are capable of generating a vibration environment with a single wave (e.g., a sine wave) and systems capable of generating a broad band random vibration (i.e., power spectrum).
2.
In 9B106.a.2., ‘designed or modified’ means the environmental chamber provides appropriate interfaces (e.g., sealing devices) to incorporate a shaker unit or other vibration test equipment as specified in 2B116.
3.
In 9B106.a.2., ‘bare table’ means a flat table, or surface, with no fixture or fittings.
- 1..
- b..
Environmental chambers capable of simulating the following flight conditions:
- 1..
Acoustic environments at an overall sound pressure level of 140 dB or greater (referenced to 20 μPa) or with a total rated acoustic power output of 4 kW or greater; and
- 2..
Altitude equal to or greater than 15 km; or
- 3..
Temperature range from below 223 K (– 50°C) to above 398 K (125°C).
- 1..
Annotations
Textual amendments
Notes on Division [9B]
Textual amendments
- F2
Annex 1 Section 9B Note inserted (20.5.2025) by The Export Control (Amendment) Regulations 2025 (S.I. 2025/532), regs. 1(2), 17(3)(a)