OpenLegislation

Division [1C117] Materials for the fabrication of ‘missiles’ components as follows:F1

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

  1. a..

    Tungsten and alloys in particulate form with a tungsten content of 97 % by weight or more and a particle size of 50 × 10–6 m (50 μm) or less;

  2. b..

    Molybdenum and alloys in particulate form with a molybdenum content of 97 % by weight or more and a particle size of 50 × 10–6 m (50 μm) or less;

  3. c..

    Tungsten materials in solid form having all of the following:

    1. 1..

      Any of the following material compositions:

      1. a..

        Tungsten and alloys containing 97 % by weight or more of tungsten;

      2. b..

        Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or

      3. c..

        Silver infiltrated tungsten containing 80 % by weight ot more of tungsten; and

    2. 2..

      Able to be machined to any of the following products:

      1. a..

        Cylinders having a diameter of 120 mm or greater and a length of 50 mm or greater;

      2. b..

        Tubes having an inner diameter of 65 mm or greater and a wall thickness of 25 mm or greater and a length of 50 mm or greater; or

      3. c..

        Blocks having a size of 120 mm by 120 mm by 50 mm or greater.

Technical Note:

In 1C117 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.

Annotations

Textual amendments

F1

Substituted by Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items.

Notes on Division [1C]

Textual amendments

F2

Annex 1 Entry 1C Technical Note colon omitted (20.5.2025) by virtue of The Export Control (Amendment) Regulations 2025 (S.I. 2025/532), regs. 1(2), 9(4)(a)