OpenLegislation

Division [2A001] Anti-friction bearings, bearing systems and components, as follows:F1

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

NB: SEE ALSO 2A101.

  1. a..

    Ball bearings and solid roller bearings, having all tolerances specified by the manufacturer in accordance with ISO 492 Tolerance Class 4 or Class 2 (or national equivalents), or better, and having both ‘rings’ and ‘rolling elements’, made from monel or beryllium;

    Note: 2A001.a. does not control tapered roller bearings.

    Technical Notes:

    F2For the purposes of 2A001.a.:

    1. F3‘Ring’ is an annular part of a radial rolling bearing incorporating one or more raceways (ISO 5593:1997).

    2. F4‘Rolling element’ is a ball or roller which rolls between raceways (ISO 5593:1997).

  2. b..

    Not used;

  3. c..

    Active magnetic bearing systems using any of the following, and specially designed components therefor:

    1. 1..

      Materials with flux densities of 2,0 T or greater and yield strengths greater than 414 MPa;

    2. 2..

      All-electromagnetic 3D homopolar bias designs for actuators; or

    3. 3..

      High temperature (450 K (177 °C) and above) position sensors.

Annotations

Textual amendments

F1

Substituted by Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items.

F2

Words in Annex 1 Entry 2A001 inserted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(i)

F3

Words in Annex 1 1 Entry 2A001 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(ii)

F4

Words in Annex 1 1 Entry 2A001 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iii)