Division [2B204] "Isostatic presses", other than those specified in 2B004 or 2B104, and related equipment, as follows:F1
United Kingdom
- a..
"Isostatic presses" having both of the following characteristics:
- 1..
Capable of achieving a maximum working pressure of 69 MPa or greater; and
- 2..
A chamber cavity with an inside diameter in excess of 152 mm;
- 1..
- b..
Dies, moulds and controls, specially designed for "isostatic presses" specified in 2B204.a.
Technical Note:
In 2B204 the inside chamber dimension is that of the chamber in which both the working temperature and the working pressure are achieved and does not include fixtures. That dimension will be the smaller of either the inside diameter of the pressure chamber or the inside diameter of the insulated furnace chamber, depending on which of the two chambers is located inside the other.
Annotations
Textual amendments
Notes on Division [2B]
Textual amendments
- F2
Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(aa)
- F3
Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(bb)
- F4
Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(dd)
- F5
Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(cc)
- F6
Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(ee)
- F7
Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(ff)