OpenLegislation

Division [2B219] Centrifugal multiplane balancing machines, fixed or portable, horizontal or vertical, as follows:F1

United Kingdom

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

  1. a..

    Centrifugal balancing machines designed for balancing flexible rotors having a length of 600 mm or more and having all of the following characteristics:

    1. 1..

      Swing or journal diameter greater than 75 mm;

    2. 2..

      Mass capability of from 0,9 to 23 kg; and

    3. 3..

      Capable of balancing speed of revolution greater than 5 000 r.p.m.;

  2. b..

    Centrifugal balancing machines designed for balancing hollow cylindrical rotor components and having all of the following characteristics:

    1. 1..

      Journal diameter greater than 75 mm;

    2. 2..

      Mass capability of from 0,9 to 23 kg;

    3. 3..

      A minimum achievable residual specific unbalance equal to or less than 10 g mm/kg per plane; and

    4. 4..

      Belt drive type.

Annotations

Textual amendments

F1

Substituted by Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items.

Notes on Division [2B]

Textual amendments

F2

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(aa)

F3

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(bb)

F4

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(dd)

F5

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(cc)

F6

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(ee)

F7

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(ff)