OpenLegislation

Division [2B228] Rotor fabrication or assembly equipment, rotor straightening equipment, bellows-forming mandrels and dies, as follows:F1

United Kingdom

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

  1. a..

    Rotor assembly equipment for assembly of gas centrifuge rotor tube sections, baffles, and end caps;

    Note:

    2B228.a. includes precision mandrels, clamps, and shrink fit machines.

  2. b..

    Rotor straightening equipment for alignment of gas centrifuge rotor tube sections to a common axis;

    Technical Note:

    In 2B228.b. such equipment normally consists of precision measuring probes linked to a computer that subsequently controls the action of, for example, pneumatic rams used for aligning the rotor tube sections.

  3. c..

    Bellows-forming mandrels and dies for producing single-convolution bellows.

    Technical Note:

    In 2B228.c. the bellows have all of the following characteristics:

    1. 1..

      Inside diameter between 75 mm and F2650 mm;

    2. 2..

      Length equal to or greater than 12,7 mm;

    3. 3..

      Single convolution depth greater than 2 mm; and

    4. 4..

      Made of high-strength aluminium alloys, maraging steel or high strength "fibrous or filamentary materials".

Annotations

Textual amendments

F1

Substituted by Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items.

F2

Words in Annex 1 Entry 2B228 substituted (1.4.2024) by The Export Control (Amendment) Regulations 2024 (S.I. 2024/346), regs. 1(1), 3(7)(d)

Notes on Division [2B]

Textual amendments

F2

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(aa)

F3

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(bb)

F4

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(dd)

F5

Words in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(cc)

F6

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(ee)

F7

Word in Annex 1 Entry 2B substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(d)(iv)(ff)