OpenLegislation

Division [6E003] Other "technology" as follows:F1

Changes not yet applied. Later legislation changes this provision in ways not yet written into the text below:

  1. a..

    "Technology" as follows:

    1. 1..

      "Technology""required" for the coating and treatment of optical surfaces to achieve an ‘optical thickness’ uniformity of 99,5 % or better for optical coatings 500 mm or more in diameter or major axis length and with a total loss (absorption and scatter) of less than 5 × 10–3;

      N.B.

      See also 2E003.f.

      Technical Note:

      F2For the purposes of 6E003.a.1., ‘optical thickness’ is the mathematical product of the index of refraction and the physical thickness of the coating.

    2. 2..

      "Technology" for the fabrication of optics using single point diamond turning techniques to produce surface finish "accuracies" of F3less (better) than 10 nm rms on non-planar surfaces exceeding 0,5 m2;

  2. b..

    "Technology" "required" for the "development", "production" or "use" of specially designed diagnostic instruments or targets in test facilities for "SHPL" testing or testing or evaluation of materials irradiated by "SHPL" beams;

Annotations

Textual amendments

F1

Substituted by Commission Delegated Regulation (EU) 2020/1749 of 7 October 2020 amending Council Regulation (EC) No 428/2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items.

F2

Words in Annex 1 Entry 6E003.a.1 substituted (13.7.2023) by The Export Control (Amendment) Regulations 2023 (S.I. 2023/695), regs. 1(1), 3(2)(i)(xliv)

F3

Words in Annex 1 Entry 6E003.a.2 substituted (1.4.2024) by The Export Control (Amendment) Regulations 2024 (S.I. 2024/346), regs. 1(1), 3(17)