Division 4 Test procedure

Key:

A = 0 mm FPS lead

B = 50 mm FPS lead

C = 150 mm FPS lead

Notes:

1. 1..

   Interpolate vertically between curves.

2. 2..

   With negative FPS leads

   • test as for zero FPS lead.

3. 3..

   With FPS leads above 150 mm

   • test as for 150 mm.

4. 4..

   With impact point heights above 1 050 mm

   • test as for 1 050 mm.

Key:

A = 50 mm FPS lead

B = 100 mm FPS lead

C = 150 mm FPS lead

D = 250mm FPS lead

E = 350 mm FPS lead

Notes

1. 1..

   Interpolate vertically between curves.

2. 2..

   With FPS leads below 50 mm test as for 50 mm.

3. 3..

   With FPS leads above 350 mm test as for 350 mm.

4. 4..

   With impact point heights above 1 050 mm test as for 1 050 mm.

5. 5..

   With a required kinetic energy above 700 J test at 700 J.

6. 6..

   With a required kinetic energy equal to or below 200 J test at 200 J.