# Commission Regulation (EC) No 761/2009 of 23 July 2009 amending, for the purpose of its adaptation to technical progress, Regulation (EC) No 440/2008 laying down test methods pursuant to Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) (Text with EEA relevance), Division 2.2: TEST REPORT

Extent: E+W+S+N.I.

The test report must include the following information:
method used,
precise specification of the substance (identity and impurities) and preliminary purification step, if any,
at least two vapour pressure and temperature values — and preferably three or more — required in the range from 0 to 50 °C (or 120 to 150 °C),
at least one of the temperatures should be at or below 25 °C, if technically possible according to the chosen method,
all original data,
a log p versus 1/T curve,
an estimate of the vapour pressure at 20 or 25 °C.
If a transition (change of state, decomposition) is observed, the following information should be noted:
nature of the change,
temperature at which the change occurs at atmospheric pressure,
vapour pressure at 10 and 20 °C below the transition temperature and 10 and 20 °C above this temperature (unless the transition is from solid to gas).
All information and remarks relevant for the interpretation of results have to be reported, especially with regard to impurities and physical state of the substance.

---
Source: https://www.legislation.gov.uk/eur/2009/761/annex/I/division/2/division/2.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2009-761/annex-I/division-2/division-2.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.