# Regulation (EC) No 78/2009 of the European Parliament and of the Council of 14 January 2009 on the type-approval of motor vehicles with regard to the protection of pedestrians and other vulnerable road users, amending Directive 2007/46/EC and repealing Directives 2003/102/EC and 2005/66/EC (Text with EEA relevance), Appendix ANNEX II: Model Information documents to be supplied by the manufacturer

Extent: E+W+S+N.I.

Part 1
Information document relating to the GB type-approval of a vehicle with regard to pedestrian protection
Part 2
Information document relating to the GB type-approval of a vehicle with regard to it being fitted with a frontal protection system
Part 3
Information document relating to the GB type-approval of a frontal protection system to be supplied as a separate technical unit
PART 1
MODEL
Information document No … relating to the GB type-approval of a vehicle with regard topedestrian protection
The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance shall be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer):
0.2.
Type:
0.2.1.
Commercial name(s) (if available):
0.3.
Means of identification of type, if marked on the vehicle:
0.3.1.
Location of that marking:
0.4.
Category of vehicle:
0.5.
Name and address of manufacturer:
0.8.
Name(s) and address(es) of assembly plant(s):
0.9.
Name and address of the manufacturer’s representative (if any):
1.
GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
1.1.
Photographs and/or drawings of a representative vehicle:
1.6.
Position and arrangement of the engine:
9.
BODYWORK
9.1.
Type of bodywork:
9.2.
Materials used and methods of construction:
9.23.
Pedestrian protection
9.23.1.
A detailed description, including photographs and/or drawings, of the vehicle with respect to the structure, the dimensions, the relevant reference lines and the constituent materials of the frontal part of the vehicle (interior and exterior) shall be provided. This description shall include detail of any active protection system installed.
PART 2
MODEL
Information document No … relating to the GB type-approval of a vehicle with regard to it being fitted with a frontal protection system
The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units make use of specialist materials, information concerning their performance shall be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer):
0.2.
Type:
0.2.1.
Commercial name(s) (if available):
0.3.
Means of identification of type, if marked on the vehicle:
0.3.1.
Location of that marking:
0.4.
Category of vehicle:
0.5.
Name and address of manufacturer:
0.7.
Location and method of affixing of the GB type-approval mark:
0.8.
Name(s) and address(es) of assembly plant(s):
0.9.
Name and address of the manufacturer’s representative (if any):
1.
GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
1.1.
Photographs and/or drawings of a representative vehicle:
2.
MASSES AND DIMENSIONS: (in kg and mm) (Refer to drawing where applicable)
2.8.
Technically permissible maximum laden mass stated by the manufacturer:
2.8.1.
Distribution of this mass among the axles (maximum and minimum):
9.
BODYWORK
9.1.
Type of bodywork:
9.24.
Frontal protection system
9.24.1.
General arrangement (drawings or photographs) indicating the position and attachment of the frontal protection systems:
9.24.2.
Drawings and/or photographs, where relevant, of air intake grilles, radiator grille, decorative trim, badges, emblems and recesses and any other external projections and parts of the exterior surface which can be regarded as critical (e.g. lighting equipment). If the parts listed in the first sentence are not critical, for documentation purposes they may be replaced by photographs, accompanied if necessary by dimensional details and/or text:
9.24.3.
Complete details of fittings required and full instructions, including torque requirements, for fitting:
9.24.4.
Drawing of bumpers:
9.24.5.
Drawing of the floor line at the vehicle front end:
PART 3
MODEL
Information document No … relating to the GB type-approval of a frontal protection system to be supplied as a separate technical unit
The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units make use of specialist materials, information concerning their performance shall be supplied.
0.
GENERAL
0.1.
Make (trade name of manufacturer):
0.2.
Type:
0.2.1.
Commercial name(s) (if available):
0.5.
Name and address of manufacturer:
0.7.
Location and method of affixing of the GB type-approval mark:
0.8.
Name(s) and address(es) of assembly plant(s):
0.9.
Name and address of the manufacturer’s representative (if any):
1.
DESCRIPTION OF THE DEVICE
1.1.
Detailed technical description (including photographs or drawings):
1.2.
Assembly and mounting instructions, including required torques:
1.3.
Listing of vehicle types to which it may be fitted:
1.4.
Any restrictions of use and conditions for fitting:

---
Source: https://www.legislation.gov.uk/eur/2009/78/annex/1/annex/II (the official version)
Page: https://openlegislation.uk/eu-regulation-2009-78/annex-1/annex-II
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.