# Regulation (EC) No 78/2009 of the European Parliament and of the Council of 14 January 2009 on the type-approval of motor vehicles with regard to the protection of pedestrians and other vulnerable road users, amending Directive 2007/46/EC and repealing Directives 2003/102/EC and 2005/66/EC (Text with EEA relevance), Appendix ANNEX III: GB type-approval model certificates Extent: E+W+S+N.I. Part 1 GB type-approval certificate relating to the type-approval of a vehicle with regard to pedestrian protection Part 2 GB type-approval certificate relating to the type-approval of a vehicle with regard to it being fitted with a frontal protection system Part 3 GB type-approval certificate relating to the type-approval of a frontal protection system to be supplied as a separate technical unit PART 1 MODEL (maximum format: A4 (210 × 297 mm)) GB TYPE-APPROVAL CERTIFICATE Stamp of GB type-approval authority Communication concerning the: GB type-approval extension of GB type-approval, refusal of GB type-approval, withdrawal of GB type-approval, of a type of vehicle with regard to pedestrian protection with regard to Regulation (EC) No 78/2009 of the European Parliament and of the Council of 14 January 2009 as it has effect in domestic law, as last amended by S.I. …./…. last amended by Regulation (EC) No …/… GB type-approval No: Reason for extension: SECTION I 0.1. Make (trade name of manufacturer): 0.2. Type: 0.2.1. Commercial name(s) (if available) 0.3. Means of identification of type, if marked on the vehicle: 0.3.1. Location of that marking: 0.4. Category of vehicle : 0.5. Name and address of manufacturer: 0.8. Names and address(es) of assembly plant(s): 0.9. Name and address of the manufacturer’s representative (if any): SECTION II 1. Additional information (where applicable) (see Addendum) 2. Technical service responsible for carrying out the tests: 3. Date of test report: 4. Number of test report: 5. Remarks (if any) (see Addendum): 6. Place: 7. Date: 8. Signature: AttachmentsInformation package. Test report. Addendum to GB type-approval certificate No … concerning the type-approval of a vehicle with regard to pedestrian protection with regard to Regulation (EC) No 78/2009 1. Additional information 1.1. Brief description of the vehicle type as regards its structure, dimensions, lines and constituent materials: 1.2. Site of engine: forward/rear/central 1.3. Drive: front-wheel/rear-wheel 1.4. Mass of vehicle submitted for testing (as defined in accordance with point 1.7 of Annex I to Regulation (EC) No 78/2009): Front axle: Rear axle: Total: 1.5. Test results according to the requirements of Annex I to Regulation (EC) No 78/2009: 1.5.1. Section 2 test results: According to the values specified in Section 2 of Annex I to Regulation (EC) No 78/2009. For monitoring purposes only. Test Value recorded Pass/fail Lower legform to bumper (where performed) Bending angle … … degrees Shear displacement … … mm Acceleration at tibia … … g Upper legform to bumper (where performed) Sum of impact forces … … kN Bending moment … … Nm Upper legform to bonnet leading edge Sum of impact forces … … kN Bending moment … … Nm Child/small adult headform (3,5 kg) to bonnet top HPC values in Zone A (12 results ) HPC values in Zone B (6 results ) Adult headform (4,8 kg) to windscreen HPC values (5 results ) 1.5.2. Section 3 test results: According to the values specified in Section 3 of Annex I to Regulation (EC) No 78/2009. For monitoring purposes only. Test Value recorded Pass/fail Lower legform to bumper (where performed) Bending angle … … degrees Shear displacement … … mm Acceleration at tibia … … g Upper legform to bumper (where performed) Sum of impact forces … … kN Bending moment … … Nm Upper legform to bonnet leading edge Sum of impact forces … … kN Bending moment … … Nm Child/small adult headform (3,5 kg) to bonnet top HPC values (9 results ) Adult headform (4,5 kg) to windscreen HPC values (9 results ) Remarks: (e.g., valid for left-hand drive and right-hand drive vehicles) 1.5.3. Section 4 requirements: Provide details of system operation method. Provide details of testing completed to verify system. Details of brake assist system supplied. Remarks: PART 2 MODEL (maximum format: A4 (210 × 297 mm)) GB TYPE-APPROVAL CERTIFICATE Stamp of GB type-approval authority Communication concerning the: GB type-approval extension of GB type-approval, refusal of GB type-approval, withdrawal of GB type-approval, of a type of a vehicle with regard to it being fitted with a frontal protection system with regard to Regulation (EC) No 78/2009 of the European Parliament and of the Council of 14 January 2009 as it has effect in domestic law, as last amended by S.I. …./…. last amended by Regulation (EC) No …/… GB type-approval No: Reason for extension: SECTION I 0.1. Make (trade name of manufacturer): 0.2. Type: 0.2.1. Commercial name(s) (if available): 0.3. Means of identification of type, if marked on the vehicle: 0.3.1. Location of that marking: 0.4. Category of vehicle : 0.5. Name and address of manufacturer: 0.7. Location and method of affixing of the GB type-approval: 0.8. Address(es) of assembly plant(s): 0.9. Name and address of the manufacturer’s representative (if any): SECTION II 1. Additional information (where applicable): See Addendum 2. Technical service responsible for carrying out the tests: 3. Date of test report: 4. Number of test report: 5. Remarks (if any): See Addendum 6. Place: 7. Date: 8. Signature: AttachmentsInformation package. Test report. Addendum to GB type-approval certificate No … concerning the type-approval of a vehicle with regard to it being fitted with a frontal protection system with regard to Regulation (EC) No 78/2009 1. Additional information, if any: 2. Remarks: 3. Test results according to the requirements of Section 5 of Annex I to Regulation (EC) No 78/2009 Test Value recorded Pass/fail Lower legform to frontal protection system — three test positions (where performed) Bending angle … … degrees Shear displacement … … mm Acceleration at tibia … … g Upper legform to frontal protection system — three test positions (where performed) Sum of impact forces … … kN Bending moment … … Nm Upper legform to frontal protection system leading edge — three test positions (monitoring only) Sum of impact forces … … kN Bending moment Nm Child/small adult headform (3,5 kg) to frontal protection system HPC values (at least three values) PART 3 MODEL (maximum format: A4 (210 × 297 mm)) GB TYPE-APPROVAL CERTIFICATE (SEPARATE TECHNICAL UNIT) Stamp of GB type-approval authority Communication concerning the: GB type-approval, extension of GB type-approval, refusal of GB type-approval, withdrawal of GB type-approval, of a type of frontal protection system to be supplied as a separate technical unit with regard to Regulation (EC) No 78/2009 of the European Parliament and of the Council of 14 January 2009 as it has effect in domestic law, as last amended by S.I. …./…. last amended by Regulation (EC) No …/… GB type-approval No: Reason for extension: SECTION I 0.1. Make (trade name of manufacturer): 0.2. Type: 0.3. Means of identification of type if marked on the frontal protection system: 0.3.1. Location of that marking: 0.5. Name and address of manufacturer: 0.7. Location and method of the affixing of the GB approval mark: 0.8. Name(s) and address(es) of assembly plant(s): 0.9. Name and address of the manufacturer’s representative (if any): SECTION II 1. Additional information: See Addendum 2. Technical service responsible for carrying out the tests: 3. Date of test report: 4. Number of test report: 5. Remarks (if any): See Addendum 6. Place: 7. Date: 8. Signature: AttachmentsInformation package. Test report. Addendum to GB type-approval certificate No … concerning the type-approval of a type of frontal protection system to be supplied as a separate technical unit with regard to Regulation (EC) No 78/2009 1. Additional information 1.1. Method of attachment: 1.2. Assembly and mounting instructions: 1.3. List of vehicles on which the frontal protection system may be fitted, any usage restrictions and necessary conditions for fitting: … 2. Remarks: 3. Test results according to the requirements of Section 5 of Annex I to Regulation (EC) No 78/2009 Test Value recorded Pass/fail Lower legform to frontal protection system — three test positions (where performed) Bending angle … … degrees Shear displacement … … mm Acceleration at tibia … … g Upper legform to frontal protection system — three test positions (where performed) Sum of impact forces … … kN Bending moment … … Nm Upper legform to frontal protection system leading edge — three test positions (monitoring only) Sum of impact forces … … kN Bending moment Nm Child/small adult headform (3,5 kg) to frontal protection system HPC values (at least three values) --- Source: https://www.legislation.gov.uk/eur/2009/78/annex/1/annex/III (the official version) Page: https://openlegislation.uk/eu-regulation-2009-78/annex-1/annex-III Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.