OpenLegislation

Division Notes

United Kingdom

Original text. Later amendments are not shown.

  1. 1This chapter does not cover:
  2. 2Subject to the operation of note 3 to Section XVI and subject to note 9 to this Chapter, a machine or appliance which answers to a description in one or more of the headings 8401 to 8424, or heading 8486 and at the same time to a description in one or other of the headings 8425 to 8480 is to be classified under the appropriate heading of the former group or under heading 8486, as the case may be, and not the latter group.
  3. 3Division 3
  4. 4Heading 8457 applies only to machine tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either:
  5. 5Division 5
  6. 6Heading 8482 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1 % or by more than 0,05 mm, whichever is less.
  7. 7A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose.
  8. 8Division 8
  9. 9Division 9

Notes on Chapter 84

Footnotes

f1

Duty temporarily suspended, on an autonomous basis, in respect of goods intended to be fitted in heavier-than-air aircraft imported duty-free or built within the Community. This suspension is subject to compliance with the formalities and conditions laid down in the relevant Community provisions (see Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253, 11.10.1993, p. 1)).

f2

Entry under this subheading is subject to the conditions laid down in the relevant Community provisions (see Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253, 11.10.1993, p. 1)).

f3

Autonomous rate of duty: Free.