# Commission Regulation (EU) No 1008/2010 of 9 November 2010 concerning type-approval requirements for windscreen wiper and washer systems of certain motor vehicles and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor (Text with EEA relevance), Division 2.2.4.1

Extent: E+W+S+N.I.

If any part of the windscreen washer system is situated in the engine compartment, the system shall be filled with water, fully primed, and placed in an ambient temperature of 80 ± 3 °C for a minimum of eight hours. The water does not have to be stabilized at this temperature. The performance of the windscreen washer system shall then be verified by actuating the system in accordance with paragraph 2.2.1.1. to 2.2.1.2.

---
Source: https://www.legislation.gov.uk/eur/2010/1008/annex/III/division/2/division/2.2/division/2.2.4/division/2.2.4.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2010-1008/annex-III/division-2/division-2.2/division-2.2.4/division-2.2.4.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.