{
  "url": "https://openlegislation.uk/eu-regulation-2010-1089/annex-III/division-4/division-4.2/division-4.2.3/division-4.2.3.7/division-1",
  "json_url": "https://openlegislation.uk/eu-regulation-2010-1089/annex-III/division-4/division-4.2/division-4.2.3/division-4.2.3.7/division-1.json",
  "legislation": "eur/2010/1089",
  "legislation_title": "Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2010-1089",
  "path": "annex/III/division/4/division/4.2/division/4.2.3/division/4.2.3.7/division/1",
  "kind": "division",
  "number": null,
  "heading": "Values for the code list FaultTypeValue",
  "text": "Value\nName\nDefinition\nParent\nfault\nfault\nA discrete surface, or zone of discrete surfaces, with some thickness, separating two rock masses across which one mass has slid past the other.\nextractionFault\nextraction fault\nA fault whose two sides have approached each other substantially in the direction perpendicular to the fault.\nfault\nhighAngleFault\nhigh angle fault\nFault that dips at least 45 degrees over more than half of its recognized extent, for which slip or separation is not explicitly specified.\nfault\nlowAngleFault\nlow angle fault\nFault that dips less than 45 degrees over more than half of the recognized extent of the fault.\nfault\nobliqueSlipFault\noblique slip fault\nFault with slip vector that has ratio of strike-parallel to dip-parallel displacement between 10 to 1 and 1 to 10 at at least one location along the mapped trace of the fault.\nfault\nreverseFault\nreverse fault\nFault with dip-parallel displacement component of slip vector more than 10 times the strike-parallel component of the slip vector at at least one location along the mapped trace of the fault, and the fault dips consistently in the same direction with the hanging wall displaced up relative to the footwall over at least half the mapped trace of the fault.\nfault\nscissorFault\nscissor fault\nA fault on which there is increasing offset or separation along the strike from an initial point of no offset, with the opposite sense of offset in the opposite direction.\nfault\nstrikeSlipFault\nstrike slip fault\nFault with strike-parallel displacement component of slip vector more than 10 times the dip-parallel component of the slip vector at at least one location along the mapped trace of the fault.\nfault",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Inserted by Commission Regulation (EU) No 1253/2013 of 21 October 2013 amending Regulation (EU) No 1089/2010 implementing Directive 2007/2/EC as regards interoperability of spatial data sets and services."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2010/1089/annex/III/division/4/division/4.2/division/4.2.3/division/4.2.3.7/division/1",
    "retrieved_at": "2026-11-01T14:50:29.783808+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}