# Commission Regulation (EU) No 406/2010 of 26 April 2010 implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on type-approval of hydrogen-powered motor vehicles (Text with EEA relevance), Division INFORMATION DOCUMENT No …: relating to GB type-approval of a vehicle with regard to hydrogen propulsion The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail. If the systems or components have electronic controls, information concerning their performance shall be supplied. Explanatory notes: Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable). Specify the tolerance If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??). Classified according to the definitions set out in Article 4 to Regulation (EU) 2018/858. 0. GENERAL 0.1. Make (trade name of manufacturer): … 0.2. Type: … 0.2.1 Commercial name(s) (if available): … 0.3. Means of identification of type, if marked on the vehicle : … 0.3.1. Location of that marking: … 0.4. Category of vehicle: … 0.5. Name and address of manufacturer: … 0.8. Name(s) and address(es) of assembly plant(s): … 0.9. Name and address of the manufacturer's representative (if any): … 1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE 1.1 Photographs and/or drawings of a representative vehicle: … 1.3.3. Powered axles (number, position, interconnection): … 1.4. Chassis (if any) (overall drawing): … 3. POWER PLANT 3.9. Hydrogen propulsion 3.9.1. Hydrogen system designed to use liquid hydrogen / Hydrogen system designed to use compressed (gaseous) hydrogen 3.9.1.1. Description and drawing of the hydrogen system: … 3.9.1.2. Name and address of the manufacturer(s) of the hydrogen system used for the propulsion of the vehicle: … 3.9.1.3. Manufacturer's system code(s) (as marked on the system, or other means of identification): … 3.9.1.4. Automatic shut-off valve(s): yes/no 3.9.1.4.1. Make(s): … 3.9.1.4.2. Type(s): … 3.9.1.4.3. Maximum Allowable Working Pressure (MAWP) MPa 3.9.1.4.4. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.4.5. Operating temperature: … 3.9.1.4.6. Number of filling cycles or duty cycles as appropriate: … 3.9.1.4.7. Approval number: … 3.9.1.4.8. Material: … 3.9.1.4.9. Operating principles: … 3.9.1.4.10. Description and drawing: … 3.9.1.5. Check valve(s) or non-return valve(s): yes/no 3.9.1.5.1. Make(s): … 3.9.1.5.2. Type(s): … 3.9.1.5.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.5.4. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.5.5. Operating temperature: … 3.9.1.5.6. Number of filling cycles or duty cycles as appropriate: … 3.9.1.5.7. Approval number: … 3.9.1.5.8. Material: … 3.9.1.5.9. Operating principles: … 3.9.1.5.10. Description and drawing: … 3.9.1.6. Container(s) and container assembly: yes/no 3.9.1.6.1. Make(s): … 3.9.1.6.2. Type(s): … 3.9.1.6.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.6.4. Nominal working pressure : … MPa 3.9.1.6.5. Number of filling cycles: … 3.9.1.6.6. Operating temperature: … 3.9.1.6.7. Capacity: … litres (water) 3.9.1.6.8. Approval number: … 3.9.1.6.9. Material: … 3.9.1.6.10. Operating principles: … 3.9.1.6.11. Description and drawing: … 3.9.1.7. Fittings: yes/no 3.9.1.7.1. Make(s): … 3.9.1.7.2. Type(s): … 3.9.1.7.3. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s): … MPa 3.9.1.7.4. Number of filling cycles or duty cycles as appropriate: … 3.9.1.7.5. Approval number: … 3.9.1.7.6. Material: … 3.9.1.7.7. Operating principles: … 3.9.1.7.8. Description and drawing: … 3.9.1.8. Flexible fuel line(s): yes/no 3.9.1.8.1. Make(s): … 3.9.1.8.2. Type(s): … 3.9.1.8.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.8.4. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.8.5. Operating temperature: … 3.9.1.8.6. Number of filling cycles or duty cycles as appropriate: … 3.9.1.8.7. Approval number: … 3.9.1.8.8. Material: … 3.9.1.8.9. Operating principles: … 3.9.1.8.10. Description and drawing: … 3.9.1.9. Heat exchanger(s): yes/no 3.9.1.9.1. Make(s): … 3.9.1.9.2. Type(s): … 3.9.1.9.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.9.4. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.9.5. Operating temperature: … 3.9.1.9.6. Number of filling cycles or duty cycles as appropriate: … 3.9.1.9.7. Approval number: … 3.9.1.9.8. Material: … 3.9.1.9.9. Operating principles: … 3.9.1.9.10. Description and drawing: … 3.9.1.10. Hydrogen filter(s): yes/no … 3.9.1.10.1. Make(s): … 3.9.1.10.2. Type(s): … 3.9.1.10.3. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.10.4. Number of filling cycles or duty cycles as appropriate: … 3.9.1.10.5. Approval number: … 3.9.1.10.6. Material: … 3.9.1.10.7. Operating principles: … 3.9.1.10.8. Description and drawing: … 3.9.1.11. Hydrogen leakage detection sensors: … 3.9.1.11.1. Make(s): … 3.9.1.11.2. Type(s): … 3.9.1.11.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.11.4. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.11.5. Operating temperature: … 3.9.1.11.6. Number of filling cycles or duty cycles as appropriate: … 3.9.1.11.7. Set values: … 3.9.1.11.8. Approval number: … 3.9.1.11.9. Material: … 3.9.1.11.10. Operating principles: … 3.9.1.11.11. Description and drawing: … 3.9.1.12. Manual or automatic valve(s): yes/no … 3.9.1.12.1. Make(s): … 3.9.1.12.2. Type(s): … 3.9.1.12.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.12.4. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.12.5. Operating temperature: … 3.9.1.12.6. Number of filling cycles or duty cycles as appropriate: … 3.9.1.12.7. Approval number: … 3.9.1.12.8. Material: … 3.9.1.12.9. Operating principles: … 3.9.1.12.10. Description and drawing: … 3.9.1.13. Pressure and/or temperature and/or hydrogen and/or flow sensor(s): yes/no … 3.9.1.13.1. Make(s): … 3.9.1.13.2. Type(s): … 3.9.1.13.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.13.4. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.13.5. Operating temperature: … 3.9.1.13.6. Number of filling cycles or duty cycles as appropriate: … 3.9.1.13.7. Set values: … 3.9.1.13.8. Approval number: … 3.9.1.13.9. Material: … 3.9.1.13.10. Operating principles: … 3.9.1.13.11. Description and drawing: … 3.9.1.14. Pressure regulator(s): yes/no … 3.9.1.14.1. Make(s): … 3.9.1.14.2. Type(s): … 3.9.1.14.3. Number of main adjustment points: … 3.9.1.14.4. Description of principle of adjustment through main adjustment points: … 3.9.1.14.5. Number of idle adjustment points: … 3.9.1.14.6. Description of principles of adjustment through idle adjustment points: … 3.9.1.14.7. Other adjustment possibilities: if so and which (description and drawings): … 3.9.1.14.8. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.14.9. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.14.10. Operating temperature: … 3.9.1.14.11. Number of filling cycles or duty cycles as appropriate: … 3.9.1.14.12. Input and output pressure: … 3.9.1.14.13. Approval number: … 3.9.1.14.14. Material: … 3.9.1.14.15. Operating principles: … 3.9.1.14.16. Description and drawing: … 3.9.1.15. Pressure relief device: yes/no … 3.9.1.15.1. Make(s): … 3.9.1.15.2. Type(s): … 3.9.1.15.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.15.4. Operating temperature: … 3.9.1.15.5. Set pressure: … 3.9.1.15.6. Set temperature: … 3.9.1.15.7. Blow off capacity: … 3.9.1.15.8. Normal maximum operating temperature: … °C 3.9.1.15.9. Nominal working pressure(s) : … MPa 3.9.1.15.10. Number of filling cycles (Class 0 components only): … 3.9.1.15.11. Approval number: … 3.9.1.15.12. Material: … 3.9.1.15.13. Operating principles: … 3.9.1.15.14. Description and drawing: … 3.9.1.16. Pressure relief valve: yes/no … 3.9.1.16.1. Make(s): … 3.9.1.16.2. Type(s): … 3.9.1.16.3. Nominal working pressure(s) and if downstream of the first pressure regulator, maximum allowable working pressure(s) : … MPa 3.9.1.16.4. Set pressure: … 3.9.1.16.5. Number of filling cycles or duty cycles as appropriate: … 3.9.1.16.6. Approval number: … 3.9.1.16.7. Material: … 3.9.1.16.8. Operating principles: … 3.9.1.16.9. Description and drawing: … 3.9.1.17. Refuelling connection or receptacle: yes/no … 3.9.1.17.1. Make(s): … 3.9.1.17.2. Type(s): … 3.9.1.17.3. Maximum Allowable Working Pressure (MAWP) … MPa 3.9.1.17.4. Operating temperature: … 3.9.1.17.5. Nominal working pressure(s) : … MPa 3.9.1.17.6. Number of filling cycles (Class 0 components only): … 3.9.1.17.7. Approval number: … 3.9.1.17.8. Material: … 3.9.1.17.9. Operating principles: … 3.9.1.17.10. Description and drawing: … 3.9.1.18. Removable storage system connector: yes/no … 3.9.1.18.1. Make(s): … 3.9.1.18.2. Type(s): … 3.9.1.18.3. Nominal working pressure(s) and maximum allowable working pressure(s): … MPa 3.9.1.18.4. Number of duty cycles: … 3.9.1.18.5. Approval number: … 3.9.1.18.6. Material: … 3.9.1.18.7. Operating principles: … 3.9.1.18.8. Description and drawing: … 3.9.2. Further documentation … 3.9.2.1. Process diagram (flow chart) of the hydrogen system … 3.9.2.2. System layout including electrical connections and other external system (inputs and/or outputs etc.) … 3.9.2.3. Key to symbols used in documentation … 3.9.2.4. Adjustment data of pressure relief devices and pressure regulators … 3.9.2.5. Layout of cooling/heating system(s) including Nominal or Maximum Allowable Working Pressure (NAWP or MAWP) and operating temperatures … 3.9.2.6. Drawings showing requirements for installation and operation. Appendix to information document Statement of Service for Hydrogen Containers Explanatory notes May be replaced by other dimensions defining the shape of the container. Delete as appropriate. Manufacturer identification Manufacturer name: Manufacturer address: Container identification Container identification: Nominal working pressure: MPa Type: Diameter: mm Length: mm Internal volume: litres Empty weight: kg Container threads: Container service life Maximum service life: Maximum number of fillingcycles: years cycles Container fire protection system Pressure relief device manufacturer: Pressure relief device identification: Pressure relief device drawing number(s): Container support method Support method: neck/cylinder mounting Support drawing number(s): Container protective coatings Purpose of protection: Protective coating drawing number(s): Container design description Container drawing numbers: Container drawings shall show at least the following information: Reference to this Regulation and the container type Principal geometrical dimensions including tolerances Container materials Container mass and internal volume including tolerances Details of the exterior protective coating Container fire protection system Container corrosion inhibitor Container corrosion inhibitor used: yes/no Corrosion inhibitor manufacturer: Corrosion inhibitor identification: Additional information 1..Manufacturing data including tolerances where appropriate: Tube extrusion, cold deformation, tube drawing, end forming, welding, heat treatment and cleaning processes for the metal manufacturing of all containers designed to use liquid hydrogen and type 1, 2 and 3 containers designed to use compressed (gaseous) hydrogen Reference to the manufacturing procedure Acceptance criteria for non-destructive examination (NDE) Composite manufacturing processes and auto-frettage according to section 3.7.2. of Part 2 to Annex IV for the manufacturing of type 2, 3 and 4 containers designed to use compressed (gaseous) hydrogen Final manufacturing inspection of surface finish, thread details and principal dimensions 2..A table summarising the results of stress analysis Container statement of service The manufacturer hereby states that the container design is suitable for use during the specified service life in the service conditions set out in section 2.7 of Annex IV to Regulation (EU) No 406/2010 as it has effect in domestic law. Manufacturer: Name, position and signature: Place, date: --- Source: https://www.legislation.gov.uk/eur/2010/406/annex/I/part/1/division/information+document+no (the official version) Page: https://openlegislation.uk/eu-regulation-2010-406/annex-I/part-1/division-information+document+no Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.