# Commission Regulation (EU) No 406/2010 of 26 April 2010 implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on type-approval of hydrogen-powered motor vehicles (Text with EEA relevance), Division 5.5.1.2


The outer jacket:
(a)a label as set out in section 3.1 of Annex V;
(b)a prohibition of additional welding, milling and stamping;
(c)an allowed orientation of the tank in the vehicle;
(d)an identification plate with the following information:
i..name of the manufacturer
ii..serial number
iii..water volume in litres
iv..Maximum Allowable Working Pressure (MAWP) [MPa]
v..year and month of manufacturing (e.g. 2009/01)
vi..operating temperature range
the identification plate shall be legible while installed.

---
Source: https://www.legislation.gov.uk/eur/2010/406/annex/III/part/2/division/5/division/5.5/division/5.5.1/division/5.5.1.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2010-406/annex-III/part-2/division-5/division-5.5/division-5.5.1/division-5.5.1.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

