{
  "url": "https://openlegislation.uk/eu-regulation-2010-406/annex-IV/part-2/division-3/division-3.9/division-3.9.1/division-3.9.1.1",
  "json_url": "https://openlegislation.uk/eu-regulation-2010-406/annex-IV/part-2/division-3/division-3.9/division-3.9.1/division-3.9.1.1.json",
  "legislation": "eur/2010/406",
  "legislation_title": "Commission Regulation (EU) No 406/2010 of 26 April 2010 implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on type-approval of hydrogen-powered motor vehicles (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2010-406",
  "path": "annex/IV/part/2/division/3/division/3.9/division/3.9.1/division/3.9.1.1",
  "kind": "division",
  "number": "3.9.1.1",
  "heading": "General",
  "text": "The manufacturer shall conduct batch testing on finished containers that are representative of normal production. The finished containers to be tested shall be randomly selected from each batch. A batch shall not exceed 200 finished containers plus those finished containers to be used in destructive tests, or one shift of successive production, whichever is greater.\nThe frequency of batch testing can be reduced as follows:\n(a)If on 10 sequential batches of containers, none of the vessels leak or rupture within 1,5 times the required number of cycles, then the pressure cycle testing may be reduced to once per 5 batches. If any tested vessel fails to meet the requirement of 1,5 times the number of pressure cycles, then batch testing shall be required for the next five batches to re-establish the reduced frequency of testing.\n(b)If on 10 sequential batches of containers, none of the vessels leak or rupture within 2 times the required number of cycles, then the pressure cycle testing may be reduced to once per 10 batches. If any tested vessel fails to meet the requirement of 2 times the number of pressure cycles, then batch testing shall be required for the next ten batches to re-establish the reduced frequency of testing.\n(c)If more than 3 months elapse since the last batch pressure cycle test, then a vessel from the next batch of production shall be pressure tested to maintain the reduced frequency.\nThe following batch tests are required:\n(a)One finished container shall be subjected to the ambient temperature pressure cycle test at the frequency given in section 3.9.1.2.;\n(b)One finished container, liner or heat-treated test sample that is representative of finished containers or liners, shall be subjected to the other tests specified in Table IV.3.9.;\n(c)One finished container shall be subjected to the burst test. If a finished container passes the ambient temperature pressure cycle test the same container may be subjected to the burst test;\n(d)If an exterior environmental protective coating is used, e.g. organic coating/paint, one finished container or test sample that is representative of the batch shall be subjected to the coating batch test.\nIf more containers than required are subjected to the tests, all results shall be documented.\nAll containers represented by a batch test that fail to meet the specified requirements shall follow the procedures specified in section 3.9.2.\nTable IV.3.9.\nBatch tests\nExplanatory notes:\n(a)For steel containers or liners refer to section 10.2. of ISO 9809-1 or section 10.2. of ISO 9809-2 as appropriate;\n(b)For stainless steel containers or liners refer to section 7.1.2.1. of EN 1964-3;\n(c)For welded stainless steel liners refer to section 8.4. of EN 13322-2;\n(d)For aluminium alloy containers or liners refer to section 10.2. of ISO 7866;\n(e)For welded aluminium alloy liners refer to sections 7.2.3. and 7.2.4. of EN 12862;\n(f)For non-metallic liners refer to section 4.1.1.;\n(a)For steel containers or liners refer to section 10.4. of ISO 9809-1 or section 10.4. of ISO 9809-2 as appropriate;\n(b)For stainless steel containers or liners refer to section 7.1.2.4. of EN 1964-3;\n(c)For welded stainless steel liners refer to section 8.6. of EN 13322-2;\n(a)For welded stainless steel liners refer to section 8.5. of EN 13322-2;\n(b)For welded aluminium alloy liners refer to sections 7.2.5., 7.2.6. and 7.2.7. of EN 12862;\nFor welded stainless steel liners refer to section 8.7. of EN 13322-2.\nTest on liner material.\nThe following test sequence shall be used for container type 4: boss torque test (section 4.2.13.), followed by an ambient temperature pressure cycling test (section 4.2.2.), followed by a leak test (section 4.2.11.).\nA leak test shall be carried out on all welded metal liners.\nTest and reference\nApplicable to container type\nSpecified design value\nTest value\n1\n2\n3\n4\nTensile test\nCharpy impact test\nBend test\nMacroscopic examination\n4.1.2.\nSoftening temperature test\n4.1.6.\nCoating batch test\n4.2.1.\nBurst test\n4.2.2.\nAmbient temperature pressure cycle test\n4.2.11.\nLeak test\n4.2.13.\nBoss torque test",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "(a)For steel containers or liners refer to section 10.2. of ISO 9809-1 or section 10.2. of ISO 9809-2 as appropriate;(b)For stainless steel containers or liners refer to section 7.1.2.1. of EN 1964-3;(c)For welded stainless steel liners refer to section 8.4. of EN 13322-2;(d)For aluminium alloy containers or liners refer to section 10.2. of ISO 7866;(e)For welded aluminium alloy liners refer to sections 7.2.3. and 7.2.4. of EN 12862;(f)For non-metallic liners refer to section 4.1.1.;"
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Test on liner material."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "(a)For steel containers or liners refer to section 10.4. of ISO 9809-1 or section 10.4. of ISO 9809-2 as appropriate;(b)For stainless steel containers or liners refer to section 7.1.2.4. of EN 1964-3;(c)For welded stainless steel liners refer to section 8.6. of EN 13322-2;"
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "(a)For welded stainless steel liners refer to section 8.5. of EN 13322-2;(b)For welded aluminium alloy liners refer to sections 7.2.5., 7.2.6. and 7.2.7. of EN 12862;"
    },
    {
      "type": "footnote",
      "label": "f5",
      "text": "For welded stainless steel liners refer to section 8.7. of EN 13322-2."
    },
    {
      "type": "footnote",
      "label": "f6",
      "text": "The following test sequence shall be used for container type 4: boss torque test (section 4.2.13.), followed by an ambient temperature pressure cycling test (section 4.2.2.), followed by a leak test (section 4.2.11.)."
    },
    {
      "type": "footnote",
      "label": "f7",
      "text": "A leak test shall be carried out on all welded metal liners."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2010/406/annex/IV/part/2/division/3/division/3.9/division/3.9.1/division/3.9.1.1",
    "retrieved_at": "2026-11-01T14:50:48.674921+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}