{
  "url": "https://openlegislation.uk/eu-regulation-2010-406/annex-IV/part-2/division-4/division-4.1/division-4.1.5/division-4.1.5.2",
  "json_url": "https://openlegislation.uk/eu-regulation-2010-406/annex-IV/part-2/division-4/division-4.1/division-4.1.5/division-4.1.5.2.json",
  "legislation": "eur/2010/406",
  "legislation_title": "Commission Regulation (EU) No 406/2010 of 26 April 2010 implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on type-approval of hydrogen-powered motor vehicles (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2010-406",
  "path": "annex/IV/part/2/division/4/division/4.1/division/4.1.5/division/4.1.5.2",
  "kind": "division",
  "number": "4.1.5.2",
  "heading": "Procedure and requirement",
  "text": "Coatings shall be evaluated using the following test methods:\n(a)Adhesion strength in accordance with ISO 4624, using method A or B as appropriate. The coating shall exhibit an adhesion rating of 4;\n(b)Flexibility in accordance with ASTM D522, using Method B with a 12,7 mm mandrel at the specified thickness at – 20 °C. Test samples shall be prepared in accordance with ASTM D522. There shall not be any visually apparent cracks;\n(c)Impact resistance in accordance with ASTM D2794. The coating at room temperature shall pass a forward impact test of 18 J;\n(d)Chemical resistance in accordance with ASTM D1308. The test shall be conducted using the open spot test method and 100 hours exposure to a 30 per cent sulphuric acid solution (battery acid with a specific gravity of 1,219) and 24 hours exposure to a polyalkalene glycol, e.g. brake fluid. There shall be no evidence of lifting, blistering or softening of the coating. The adhesion shall meet a rating of 3 when tested in accordance with ASTM D3359. This test is not necessary if a test is undertaken in accordance with section 4.2.6.;\n(e)Light and water exposure in accordance with ASTM G154, using an exposure of 1 000 hours. There shall be no evidence of blistering. The adhesion shall meet a rating of 3 when tested in accordance with ISO 4624. The maximum gloss loss allowed is 20 per cent;\n(f)Salt spray exposure in accordance with ASTM B117, using an exposure of 500 hours. Undercutting shall not exceed 3 mm at the scribe mark. There shall be no evidence of blistering. The adhesion shall meet a rating of 3 when tested in accordance with ASTM D3359;\n(g)Resistance to chipping at room temperature using the ASTM D3170. The coating shall have a rating of 7A or better, and there shall not be any exposure of the substrate.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2010/406/annex/IV/part/2/division/4/division/4.1/division/4.1.5/division/4.1.5.2",
    "retrieved_at": "2026-11-01T14:50:48.674921+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}