# Commission Regulation (EU) No 406/2010 of 26 April 2010 implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on type-approval of hydrogen-powered motor vehicles (Text with EEA relevance), Division 4.1.5.2: Procedure and requirement


Coatings shall be evaluated using the following test methods:
(a)Adhesion strength in accordance with ISO 4624, using method A or B as appropriate. The coating shall exhibit an adhesion rating of 4;
(b)Flexibility in accordance with ASTM D522, using Method B with a 12,7 mm mandrel at the specified thickness at – 20 °C. Test samples shall be prepared in accordance with ASTM D522. There shall not be any visually apparent cracks;
(c)Impact resistance in accordance with ASTM D2794. The coating at room temperature shall pass a forward impact test of 18 J;
(d)Chemical resistance in accordance with ASTM D1308. The test shall be conducted using the open spot test method and 100 hours exposure to a 30 per cent sulphuric acid solution (battery acid with a specific gravity of 1,219) and 24 hours exposure to a polyalkalene glycol, e.g. brake fluid. There shall be no evidence of lifting, blistering or softening of the coating. The adhesion shall meet a rating of 3 when tested in accordance with ASTM D3359. This test is not necessary if a test is undertaken in accordance with section 4.2.6.;
(e)Light and water exposure in accordance with ASTM G154, using an exposure of 1 000 hours. There shall be no evidence of blistering. The adhesion shall meet a rating of 3 when tested in accordance with ISO 4624. The maximum gloss loss allowed is 20 per cent;
(f)Salt spray exposure in accordance with ASTM B117, using an exposure of 500 hours. Undercutting shall not exceed 3 mm at the scribe mark. There shall be no evidence of blistering. The adhesion shall meet a rating of 3 when tested in accordance with ASTM D3359;
(g)Resistance to chipping at room temperature using the ASTM D3170. The coating shall have a rating of 7A or better, and there shall not be any exposure of the substrate.

---
Source: https://www.legislation.gov.uk/eur/2010/406/annex/IV/part/2/division/4/division/4.1/division/4.1.5/division/4.1.5.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2010-406/annex-IV/part-2/division-4/division-4.1/division-4.1.5/division-4.1.5.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

