# Commission Regulation (EU) No 406/2010 of 26 April 2010 implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on type-approval of hydrogen-powered motor vehicles (Text with EEA relevance), Division 4.2.14.2: Procedure


Special consideration shall be given to safety when conducting this test.
The container shall be tested in the following sequence:
(a)Use hydrogen gas to pressure cycle the container between ≤ 2,0 MPa and ≥ nominal working pressure for 1 000 cycles. The filling time shall not exceed 5 minutes. Temperatures during venting shall not exceed the values specified in section 2.7.5;
(b)Leak test in accordance with section 4.2.11.
Section the container and inspect the liner and liner/end boss interface for evidence of any deterioration, such as fatigue cracking or electrostatic discharge.

---
Source: https://www.legislation.gov.uk/eur/2010/406/annex/IV/part/2/division/4/division/4.2/division/4.2.14/division/4.2.14.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2010-406/annex-IV/part-2/division-4/division-4.2/division-4.2.14/division-4.2.14.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.