# Commission Regulation (EU) No 406/2010 of 26 April 2010 implementing Regulation (EC) No 79/2009 of the European Parliament and of the Council on type-approval of hydrogen-powered motor vehicles (Text with EEA relevance), Annex VII: Standards referenced by this Regulation

Extent: E+W+S+N.I.

References to standards in this Regulation shall be understood to refer to the following versions of the standards:
ISO 188:2007
Rubber, vulcanised or thermoplastic — Accelerated ageing and heat resistance tests
ISO 306:2004
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ISO 527-2:1993/Cor 1:1994
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 1431-1:2004/Amd 1:2009
Rubber, vulcanised or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
ISO 2768-1:1989
General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
ISO 2808:2007
Paints and varnishes — Determination of film thickness
ISO 3864-1:2002
Graphical symbols – Safety colours and safety signs – Part 1: Design principles for safety signs in workplaces and public areas
ISO 4624:1978
Paints and varnishes — Pull-off test for adhesion
ISO 6506-1:2005
Metallic materials — Brinell hardness test — Part 1: Test method
ISO 6957:1988
Copper alloys — Ammonia test for stress corrosion resistance
ISO 7225:2005
Gas cylinders — Precautionary labels
ISO 7866:1999
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
ISO 8491:2004
Metallic materials — Tube (in full section) — Bend test
ISO 9227:2006
Corrosion tests in artificial atmospheres — Salt spray tests
ISO 9809-1:1999
Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
ISO 9809-2:2000
Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
ISO 11114-1:1997
Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials
ISO 11114-4:2005
Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
ISO/TS 14687-2:2008
Hydrogen fuel — Product specification — Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles
EN 1251-2:2000/AC:2006
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Design, fabrication, inspection and testing
EN 1252-1:1998/AC:1998
Cryogenic vessels — Materials — Part 1: Toughness requirements for temperatures below – 80 °C
EN 1797:2001
Cryogenic vessels — Gas/material compatibility
EN 1964-3:2000
Transportable gas cylinders — Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres — Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1 100 MPa
EN 10204:2004
Metallic products — Types of inspection documents
EN 12300:1998/A1:2006
Cryogenic vessels — Cleanliness for cryogenic service
EN 12434:2000/AC:2001
Cryogenic vessels — Cryogenic flexible hoses
EN 12862:2000
Transportable gas cylinders — Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
EN 13322-2:2003/A1:2006
Transportable gas cylinders — Refillable welded steel gas cylinders — Design and construction — Part 2: Stainless steel
EN 13648-1:2008
Cryogenic vessels — Safety devices for protection against excessive pressure — Part 1: Safety valves for cryogenic service
EN 13648-2:2002
Cryogenic vessels — Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices for cryogenic service
EN 13648-3:2002
Cryogenic vessels — Safety devices for protection against excessive pressure — Part 3: Determination of required discharge — Capacity and sizing
ASTM B117 - 07a
Standard practice for operating salt spray (fog) apparatus
ASTM D522 - 93a(2008)
Standard test methods for mandrel bend test of attached organic coatings
ASTM D572 - 04
Standard test method for rubber — Deterioration by heat and oxygen
ASTM D1308 - 02(2007)
Standard test method for effect of household chemicals on clear and pigmented organic finishes
ASTM D2344 / D2344M - 00(2006)
Standard test method for short-beam strength of polymer matrix composite materials and their laminates
ASTM D2794 - 93(2004)
Standard test method for resistance of organic coatings to the effects of rapid deformation (impact)
ASTM D3170 - 03(2007)
Standard test method for chipping resistance of coatings
ASTM D3359 - 08
Standard test methods for measuring adhesion by tape test
ASTM D3418 - 08
Test method for transition temperatures and enthalpies of fusion and crystallisation of polymers by differential scanning calorimetry
ASTM G154 - 06
Standard practice for operating fluorescent light apparatus for UV exposure of non-metallic materials

---
Source: https://www.legislation.gov.uk/eur/2010/406/annex/VII (the official version)
Page: https://openlegislation.uk/eu-regulation-2010-406/annex-VII
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.