# Commission Regulation (EU) No 102/2011 of 4 February 2011 amending Regulation (EU) No 1089/2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services, Annex I

Extent: E+W+S+N.I.

Annex I to Regulation (EU) No 1089/2010 is amended as follows:
1.. All occurrences of ‘This code list shall be managed in a common code list register.’ are replaced by ‘This code list shall not be extended by Member States.’
2.. In point 4.1, the following table is added:
Allowed values for the code list ConditionOfFacilityValue
Value
Definition
disused
The facility is not used.
functional
The facility is functional.
projected
The facility is being designed. Construction has not yet started.
underConstruction
The facility is under construction and not yet functional. This applies only to the initial construction of the facility and not to maintenance work.
3.. In point 4.2, the following paragraphs are added:
‘This code list shall not be extended by Member States.
The allowed values for this code list are the two-letter country codes listed in the Interinstitutional style guide published by the Publications Office of the European Union.’
4.. In point 5.3.1, the following table is added:
Allowed values for the code list ConnectionTypeValue
Value
Definition
crossBorderConnected
Connection between two network elements in different networks of the same type, but in adjacent areas. The referenced network elements represent the different, but spatially connected real-world phenomena.
crossBorderIdentical
Connection between two network elements in different networks of the same type, but in adjacent areas. The referenced network elements represent the same real-world phenomena.
intermodal
Connection between two network elements in different transport networks that use a different transport mode. The connection represents a possibility for the transported media (people, goods, etc) to change from one transport mode to another.
5.. In point 5.3.2, the following table is added:
Allowed values for the code list LinkDirectionValue
Value
Definition
bothDirections
In both directions.
inDirection
In direction of the link.
inOppositeDirection
In the opposite direction of the link.

---
Source: https://www.legislation.gov.uk/eur/2011/102/annex/I (the official version)
Page: https://openlegislation.uk/eu-regulation-2011-102/annex-I
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.