{
  "url": "https://openlegislation.uk/eu-regulation-2011-109/annex-IV/division-1/division-0/division-0.1",
  "json_url": "https://openlegislation.uk/eu-regulation-2011-109/annex-IV/division-1/division-0/division-0.1.json",
  "legislation": "eur/2011/109",
  "legislation_title": "Commission Regulation (EU) No 109/2011 of 27 January 2011 implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards type-approval requirements for certain categories of motor vehicles and their trailers as regards spray suppression systems (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2011-109",
  "path": "annex/IV/division/1/division/0/division/0.1",
  "kind": "division",
  "number": "0.1",
  "heading": null,
  "text": "Category N and O vehicles, with the exception of off-road vehicles as defined in Annex I to Regulation (EU) 2018/858, shall be constructed and/or fitted with spray suppression systems in such a way as to meet the requirements laid down in this Annex. In the case of chassis/cab vehicles, these requirements may only be applied to the wheels covered by the cab.\nAt the manufacturer's discretion, for vehicles of category N 1 , N 2 with a permissible maximum laden mass not exceeding 7,5 tonnes, O 1 and O 2, the requirements of Commission Regulation (EU) No 1009/2010 as set out for vehicle category M 1 may be applied instead of the requirements of this Annex. In such a case, the information document shall include all the particulars relevant to wheel guards as laid down in Article 3(2) of that Regulation.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Substituted by Commission Regulation (EU) 2015/166 of 3 February 2015 supplementing and amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of specific procedures, assessment methods and technical requirements, and amending Directive 2007/46/EC of the European Parliament and of the Council, and Commission Regulations (EU) No 1003/2010, (EU) No 109/2011 and (EU) No 458/2011 (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Words in Annex 4 point 0.1 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 63(12)"
    },
    {
      "type": "footnote",
      "label": "f1",
      "text": "Commission Regulation (EU) No 1009/2010 of 9 November 2010 concerning type-approval requirements for wheel guards of certain motor vehicles and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor ( OJ L 292, 10.11.2010, p. 21 )."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2011/109/annex/IV/division/1/division/0/division/0.1",
    "retrieved_at": "2026-11-01T14:50:20.929294+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}