# Commission Regulation (EU) No 109/2011 of 27 January 2011 implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards type-approval requirements for certain categories of motor vehicles and their trailers as regards spray suppression systems (Text with EEA relevance), Division 8.3.2.3

Extent: E+W+S+N.I.

Apart from the lower part, which includes the spray-suppression device, the rain flap as referred to in point 8.3.1(b) must not bend by more than 100 mm towards the rear under the effect of a force of 3 N per 100 mm of width of the rain flap measured at the intersection of the rain flap with the spray-suppression device in its working position, applied at a distance of 50 mm above the lower edge of the rain flap.

---
Source: https://www.legislation.gov.uk/eur/2011/109/annex/IV/division/3/division/8/division/8.3/division/8.3.2/division/8.3.2.3 (the official version)
Page: https://openlegislation.uk/eu-regulation-2011-109/annex-IV/division-3/division-8/division-8.3/division-8.3.2/division-8.3.2.3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

