Division 2 FLEXIBILITYF1

Providing that the mandatory information required by Article 6 of Regulation (EU) No 305/2011 is provided in a clear, complete and coherent manner, when drawing up a declaration of performance, it is possible to:

1. (1)

   use a different layout as in the model;

2. (2)

   combine the points of the model by presenting some of them together;

3. (3)

   present the points of the model in a different order or using one or more tables;

4. (4)

   omit some points of the model which are not relevant for the product for which a declaration of performance is drawn up. For example, this is the case since the declaration of performance may be based either on a F2designated standard or on a F3UK Technical Assessment issued for the product, rendering the other alternative not applicable. These omissions could also concern the points on the authorised representative or on the use of Appropriate Technical Documentation and the Specific Technical Documentation;

5. (5)

   present the points without numbering them.

If a manufacturer wishes to issue a single declaration of performance covering different variations of a product-type, at least the following elements need to be listed separately and clearly for every product variation: the number of the declaration of performance, the identification code under point 1 and the declared performances/s under point 7.