# Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance), Division 2.2.1

Extent: E+W+S+N.I.

Each replacement pollution control device shall be accompanied by the following information:
(a)the manufacturer’s name or trade mark;
(b)the make and identifying part number of the replacement pollution control device as recorded in the information document issued in accordance with the model set out in Appendix 1;
(c)the vehicles or engines including year of manufacture for which the replacement pollution control device is approved, including, where applicable, a marking to identify if the replacement pollution control device is suitable for fitting to a vehicle that is equipped with an on-board diagnostic (OBD) system;
(d)installation instructions.
The information referred to in this point shall be available in the product catalogue distributed to points of sale by the manufacturer of replacement pollution control devices.

---
Source: https://www.legislation.gov.uk/eur/2011/582/annex/XI/division/2/division/2.2/division/2.2.1 (the official version)
Page: https://openlegislation.uk/eu-regulation-2011-582/annex-XI/division-2/division-2.2/division-2.2.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.