# Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance), Division 2.2.2

Extent: E+W+S+N.I.

Each original replacement pollution control device shall be accompanied by the following information:
(a)the vehicle or engine manufacturer’s name or trade mark;
(b)the make and identifying part number of the original replacement pollution control device as recorded in the information mentioned in Section 2.3;
(c)the vehicles or engines for which the original replacement pollution control device is of a type covered by point 3.2.12.2.1 of Appendix 4 to Annex I, including, where applicable, a marking to identify if the original replacement pollution control device is suitable for fitting to a vehicle that is equipped with an on-board diagnostic (OBD) system;
(d)installation instructions.
This information referred to in this point shall be available in the product catalogue distributed to points of sale by the vehicle or engine manufacturer.

---
Source: https://www.legislation.gov.uk/eur/2011/582/annex/XI/division/2/division/2.2/division/2.2.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2011-582/annex-XI/division-2/division-2.2/division-2.2.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.