{
  "url": "https://openlegislation.uk/eu-regulation-2012-1194/annex-III/division-1/division-1.1",
  "json_url": "https://openlegislation.uk/eu-regulation-2012-1194/annex-III/division-1/division-1.1.json",
  "legislation": "eur/2012/1194",
  "legislation_title": "Commission Regulation (EU) No 1194/2012 of 12 December 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment (Text with EEA relevance) (revoked)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2012-1194",
  "path": "annex/III/division/1/division/1.1",
  "kind": "division",
  "number": "1.1",
  "heading": "Energy efficiency requirements for directional lamps",
  "text": "The energy efficiency index (EEI) of the lamp is calculated as follows and rounded to two decimal places:\nEEI=Pcor∕Prefwhere:\nPcor is the rated power measured at nominal input voltage and corrected where appropriate in accordance with Table 1. The correction factors are cumulative where appropriate.\nPref is the reference power obtained from the useful luminous flux of the lamp (Φuse) by the following formula:\nFor models with Φuse < 1 300 lumen: Pref=0,88Φuse+0,049Φuse\nFor models with Φuse ≥ 1 300 lumen: Pref=0,07341Φuse\nΦuse is defined as follows:\ndirectional lamps with a beam angle ≥ 90° other than filament lamps and carrying a warning on their packaging in accordance with point 3.1.2(j) of this Annex: rated luminous flux in a 120° cone (Φ120°)\nother directional lamps: rated luminous flux in a 90° cone (Φ90°).\nThe maximum EEI of directional lamps is indicated in Table 2.\nStage 3 for mains-voltage filament lamps shall apply only if no later than 30 September 2015, evidence is produced by the Commission through a detailed market assesment and communicated to the Consultation Forum that there are mains-voltage lamps on the market that are:\ncompliant with the maximum EEI requirement in stage 3;\naffordable in terms of not entailing excessive costs for the majority of end-users;\nbroadly equivalent in terms of consumer-relevant functionality parameters to mains-voltage filament lamps available on the date of entry into force of this Regulation, including in terms of luminous fluxes spanning the full range of reference luminous fluxes listed in Table 6;\ncompatible with equipment designed for installation between the mains and filament lamps available on the date of entry into force of this Regulation according to state-of-the-art requirements for compatibility.",
  "extent": "E+W+S+N.I.",
  "status": "repealed",
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Regulation revoked (E.W.S.) (1.10.2021) by RThe Ecodesign for Energy-elated Products and Energy Information (Lighting Products) Regulations 2021 (S.I. 2021/1095), regs. 1(2), 19(d) (with reg. 22(1)(2))"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2012/1194/annex/III/division/1/division/1.1",
    "retrieved_at": "2026-11-01T14:48:57.688726+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}