# Commission Regulation (EU) No 1230/2012 of 12 December 2012 implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council with regard to type-approval requirements for masses and dimensions of motor vehicles and their trailers and amending Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance), Division 1.4.2: In the case referred to in point 1.4.1, the manufacturer shall indicate one or both of the following additional symbols below or to the side of the mandatory inscriptions on the manufacturer’s statutory plate, outside a clearly marked rectangle which shall enclose only the mandatory information.

Extent: E+W+S+N.I.

‘96/53/EC ARTICLE 9A COMPLIANT’ , or
‘C&U REGULATION 7(3D) COMPLIANT’
The height of the symbol’s characters shall not be less than 4 mm. The symbols above shall also be added to the ‘remarks’ in the Certificate of Conformity as to allow inclusion of this information in on-board vehicle registration papers.

---
Source: https://www.legislation.gov.uk/eur/2012/1230/annex/I/part/C/division/1/division/1.4.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2012-1230/annex-I/part-C/division-1/division-1.4.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.