OpenLegislation

Division 2.1 Calculation procedure

United Kingdom

Original text. Later amendments are not shown.

Notations:

‘M’

  • technically permissible maximum laden mass;

    • ‘TM’

  • technically permissible maximum towable mass;

    • ‘MC’

  • technically permissible maximum laden mass of the combination;

    • ‘mi’

  • the technically permissible maximum mass on the solo axle designated ‘i’, where i varies from 1 to the total number of axles of the vehicle;

    • ‘mc’

  • technically permissible maximum mass at the coupling point;

    • ‘μj’

  • the technically permissible maximum mass on the group of axles designated ‘j’, where j varies from 1 to the total number of groups of axles.

    1. 2.1.1Division 2.1.1
    2. 2.1.2Division 2.1.2
    3. 2.1.3Division 2.1.3
    4. 2.1.4Division 2.1.4
    5. 2.1.4.1Division 2.1.4.1
    6. 2.1.4.2The manufacturer shall indicate one or both of the following additional symbols as well as the value of the increase in weight below or to the side of the mandatory inscriptions on the manufacturer’s statutory plate, outside a clearly marked rectangle which shall enclose only the mandatory information.