OpenLegislation

Division 1 Maximum authorised dimensions

United Kingdom

Original text. Later amendments are not shown.

  1. 1.1The dimensions shall not exceed the following values:
  2. 1.2Division 1.2
  3. 1.3The measurement of the length... and front fitting radius shall be conducted where the loading surface or the reference surface referred to in point 1.2.1 second subparagraph of Annex 7 to UNECE Regulation No 55 is horizontal.
  4. 1.4Division 1.4
  5. 1.4.1Division 1.4.1
  6. 1.4.1.1Division 1.4.1.1
  7. 1.4.1.1.1Division 1.4.1.1.1
  8. 1.4.1.1.2Division 1.4.1.1.2
  9. 1.4.1.1.3Division 1.4.1.1.3
  10. 1.4.1.2Division 1.4.1.2
  11. 1.4.1.2.1Division 1.4.1.2.1
  12. 1.4.1.2.2Division 1.4.1.2.2
  13. 1.4.1.2.3Division 1.4.1.2.3
  14. 1.4.1.2.4Division 1.4.1.2.4
  15. 1.4.1.3It shall be verified by the technical service, to the satisfaction of the type-approval authority that aerodynamic devices and equipment positioned in both, the in-use and the retracted or folded positions, do not completely block the ventilation of the loading area. All other applicable requirements relating to the vehicle systems shall be fully complied with when the devices and equipment are placed in both their in-use and retracted or folded positions.