Annex I

Annex I to Regulation (EC) No 2003/2003 is amended as follows:

1. (1)

   Section E.1 is amended as follows:

   1. (a)

      In Section E.1.1, entry 1f is replaced by the following:

      ‘

      1f

      Borated fertiliser in suspension

      Product obtained by suspending types 1a and/or 1b and/or 1c and/or 1d in water

      2 % total B

      The designation must include the names of the constituents present

      Total boron (B) Water-soluble boron (B) if present

      ’

   2. (b)

      Section E.1.2 is amended as follows:

      1. (i)

         entry 2c is replaced by the following:

         ‘

         2c

         Cobalt fertiliser solution

         Aqueous solution of types 2a and/or 2b or 2d

         2 % water-soluble Co When types 2a and 2d are mixed, the complexed fraction must be at least 40 % of the water-soluble Co

         The designation must include: (1) the name(s) of the mineral anion(s), if present (2) the name of any authorised chelating agent that chelates at least 1 % water-soluble cobalt if present and that can be identified and quantified by a European standard or the name of the authorised complexing agent that can be identified by a European standard, if present

         Water-soluble cobalt (Co) Cobalt (Co) chelated by each authorised chelating agent that chelates at least 1 % water-soluble cobalt and that can be identified and quantified by a European standard Cobalt (Co) complexed by the authorised complexing agent that can be identified by a European Standard Optional: total cobalt (Co) chelated by authorised chelating agent(s)

         ’

      2. (ii)

         the following entry 2d is added:

         ‘

         2d

         Cobalt complex

         Water-soluble product containing cobalt chemically combined with one authorised complexing agent

         5 % of water-soluble Co and the complexed fraction must be at least 80 % of the water-soluble cobalt

         The designation must include the name of the authorised complexing agent that can be identified by a European Standard

         Water-soluble cobalt (Co) Total cobalt (Co) complexed

         ’

   3. (c)

      Section E.1.3 is amended as follows:

      1. (i)

         entry 3f is replaced by the following:

         ‘

         3f

         Copper fertiliser solution

         Aqueous solution of types 3a and/or 3d or 3i

         2 % water-soluble Cu When types 3a and 3i are mixed, the complexed fraction must be at least 40 % of the water-soluble Cu

         The designation must include: (1) the name(s) of the mineral anion(s), if present (2) the name of any authorised chelating agent that chelates at least 1 % water-soluble copper if present and that can be identified and quantified by a European standard or the name of the authorised complexing agent that can be identified by a European standard

         Water-soluble copper (Cu) Copper (Cu) chelated by each authorised chelating agent that chelates at least 1 % water-soluble copper and that can be identified and quantified by a European standard Copper (Cu) complexed by the authorised complexing agent that can be identified by a European Standard Optional: Total copper (Cu) chelated by authorised chelating agent(s)

         ’

      2. (ii)

         entry 3h is replaced by the following:

         ‘

         3h

         Copper fertiliser in suspension

         Product obtained by suspending types 3a and/or 3b and/or 3c and/or 3d and/or 3g in water

         17 % total Cu

         The designation must include: (1) the name(s) of the anions, if present (2) the name of any authorised chelating agent that chelates at least 1 % water-soluble copper if present and that can be identified and quantified by a European standard

         Total copper (Cu) Water-soluble copper (Cu) if present Copper (Cu) chelated by each authorised chelating agent that chelates at least 1 % water-soluble copper and that can be identified and quantified by a European standard

         ’

      3. (iii)

         the following entry 3i is added:

         ‘

         3i

         Copper complex

         Water-soluble product containing copper chemically combined with one authorised complexing agent

         5 % of water-soluble Cu and the complexed fraction must be at least 80 % of the water-soluble copper

         The designation must include the name of the authorised complexing agent that can be identified by a European Standard

         Water-soluble copper (Cu) Total copper (Cu) complexed

         ’

   4. (d)

      Section E.1.4 is amended as follows:

      1. (i)

         entry 4c is replaced by the following:

         ‘

         4c

         Iron fertiliser solution

         Aqueous solution of types 4a and/or 4b or 4d

         2 % water-soluble Fe When types 4a and 4d are mixed, the complexed fraction must be at least 40 % of the water-soluble Fe

         The designation must include: (1) the name(s) of the mineral anion(s), if present (2) the name of any authorised chelating agent that chelates at least 1 % water-soluble iron if present and that can be identified and quantified by a European standard or the name of the authorised complexing agent that can be identified by a European standard

         Water-soluble iron (Fe) Iron (Fe) chelated by each authorised chelating agent that chelates at least 1 % water-soluble iron and that can be identified and quantified by a European standard Iron (Fe) complexed by the authorised complexing agent that can be identified by a European Standard Optional: total iron (Fe) chelated by authorised chelating agent(s)

         ’

      2. (ii)

         the following entry 4d is added:

         ‘

         4d

         Iron complex

         Water-soluble product containing iron chemically combined with one authorised complexing agent

         5 % of water-soluble Fe and the complexed fraction must be at least 80 % of the water-soluble iron

         The designation must include the name of the authorised complexing agent that can be identified by a European Standard

         Water-soluble iron (Fe) Total iron (Fe) complexed

         ’

   5. (e)

      Section E.1.5 is amended as follows:

      1. (i)

         entry 5e is replaced by the following:

         ‘

         5e

         Manganese fertiliser solution

         Aqueous solution of types 5a and/or 5b or 5g

         2 % water-soluble Mn When types 5a and 5g are mixed, the complexed fraction must be at least 40 % of the water-soluble Mn

         The designation must include: (1) the name(s) of the mineral anion(s), if present (2) the name of any authorised chelating agent that chelates at least 1 % water-soluble manganese if present and that can be identified and quantified by a European standard or the name of the authorised complexing agent that can be identified by a European standard

         Water-soluble manganese (Mn) Manganese (Mn) chelated by each authorised chelating agent that chelates at least 1 % water-soluble manganese and that can be identified and quantified by a European standard Manganese (Mn) complexed by the authorised complexing agent that can be identified by a European Standard Optional: total manganese (Mn) chelated by authorised chelating agent(s)

         ’

      2. (ii)

         the following entries 5f and 5g are added:

         ‘

         5f	Manganese fertiliser in suspension	Product obtained by suspending types 5a and/or 5b and/or 5c in water	17 % total Mn	The designation must include: (1) the name(s) of the anions, if present (2) the name of any authorised chelating agent that chelates at least 1 % water-soluble manganese if present and that can be identified and quantified by a European standard	Total manganese (Mn) Water-soluble manganese (Mn) if present Manganese (Mn) chelated by each authorised chelating agent that chelates at least 1 % water-soluble manganese and that can be identified and quantified by a European standard
         5g	Manganese complex	Water-soluble product containing manganese chemically combined with one authorised complexing agent	5 % of water-soluble Mn and the complexed fraction must be at least at least 80 % of the water-soluble manganese	The designation must include the name of the authorised complexing agent that can be identified by a European Standard	Water-soluble manganese (Mn) Total manganese (Mn) complexed

         ’

   6. (f)

      Section E.1.7 is amended as follows:

      1. (i)

         entry 7e is replaced by the following:

         ‘

         7e

         Zinc fertiliser solution

         Aqueous solution of types 7a and/or 7b or 7g

         2 % water-soluble Zn When types 7a and 7g are mixed, the complexed fraction must be at least 40 % of the water-soluble Zn

         The designation must include: (1) the name(s) of the mineral anion(s), if present (2) the name of any authorised chelating agent that chelates at least 1 % water-soluble zinc if present and that can be identified and quantified by a European standard or the name of the authorised complexing agent that can be identified by a European standard

         Water-soluble zinc (Zn) Zinc (Zn) chelated by each authorised chelating agent that chelates at least 1 % water-soluble zinc and that can be identified and quantified by a European standard Zinc (Zn) complexed by the authorised complexing agent that can be identified by a European Standard Optional: total zinc (Zn) chelated by authorised chelating agent(s)

         ’

      2. (ii)

         the following entry 7g is added:

         ‘

         7g

         Zinc complex

         Water-soluble product containing zinc chemically combined with one authorised complexing agent

         5 % of water-soluble zinc and the complexed fraction must be at least 80 % of the water-soluble zinc

         The designation must include the name of the authorised complexing agent that can be identified by a European Standard

         Water-soluble zinc (Zn) Total zinc (Zn) complexed

         ’

2. (2)

   in Section E.2, Table E.2.4 is replaced by the following:

   ‘

   No	Type designation	Data on method of production and essential requirements	Minimum content of nutrients (percentage by weight)Data on expression of nutrientsOther requirements	Other data on the type designation	Nutrient content to be declaredForms and solubilities of the micro-nutrientsOther criteria
   1	2	3	4	5	6
   1	Mixture of micro-nutrients	Product obtained by mixing two or more E.1 types of fertiliser or obtained by dissolving and/or suspending two or more E.1 types of fertiliser in water	(1) 5 % total content for a solid mixture or (2) 2 % total content for a fluid mixture Individual micro-nutrients according to Section E.2.1	Name of each micronutrient and its chemical symbol present listed in alphabetical order of their chemical symbols followed by the name(s) of its counter-ion(s) immediately after the type designation.	Total content of each micro-nutrient expressed as percentage of the fertiliser by mass, except where a micro-nutrient is totally water-soluble. Water-soluble content of each micro-nutrient expressed as percentage of the fertiliser by mass where the soluble content is at least half of the total content. Where a micro-nutrient is totally water-soluble, only the water-soluble content shall be declared. Where a micro-nutrient is chemically linked with an organic molecule, the micro-nutrient shall be declared immediately following the water-soluble content as a percentage of the fertiliser by mass, followed by one of the terms “chelated by” or “complexed by” with the name of each authorised chelating or complexing agent(s) as set out in Section E.3. The name of the organic molecule may be replaced by its initials. The following statement below the compulsory and optional declarations: “To be used only where there is a recognised need. Do not exceed the appropriate dose rate”.

   ’

3. (3)

   Section E.3.1 is replaced by the following:

   ‘E.3.1.

   Chelating agents^f1

   Acids, or sodium, potassium or ammonium salts of:

   For information only.;
   No	Designation	Alternative designation	Chemical formula	CAS number of the acidf2
   1	Ethylenediaminetetraacetic acid	EDTA	C10H16O8N2	60-00-4
   2	2-hydroxyethylethylenediaminetriacetic acid	HEEDTA	C10H18O7N2	150-39-0
   3	diethylenetriaminepentaacetic acid	DTPA	C14H23O10N3	67-43-6
   4	ethylenediamine- N,N’-di[(ortho-hydroxyphenyl)acetic acid]	[o,o] EDDHA	C18H20O6N2	1170-02-1
   5	ethylenediamine- N-[(ortho-hydroxyphenyl)acetic acid]- N’-[(para-hydroxyphenyl)acetic acid]	[o,p] EDDHA	C18H20O6N2	475475-49-1
   6	ethylenediamine- N,N’-di[(ortho-hydroxy-methylphenyl)acetic acid]	[o,o] EDDHMA	C20H24O6N2	641632-90-8
   7	ethylenediamine- N-[(ortho-hydroxy-methylphenyl)acetic acid]- N’-[(para-hydroxy-methylphenyl)acetic acid]	[o,p] EDDHMA	C20H24O6N2	641633-41-2
   8	ethylenediamine- N,N’-di[(5-carboxy-2-hydroxyphenyl)acetic acid]	EDDCHA	C20H20O10N2	85120-53-2
   9	ethylenediamine- N,N’-di[(2-hydroxy-5-sulfophenyl)acetic acid] and its condensation products	EDDHSA	C18H20O12N2S2 + n*(C12H14O8N2S)	57368-07-7 and 642045-40-7
   10	Iminodisuccinic acid	IDHA	C8H11O8N	131669-35-7
   11	N,N’-di(2-hydroxybenzyl)ethylenediamine-N,N’-diacetic acid	HBED	C20H24N2O6	35998-29-9

   ’

4. (4)

   Section E.3.2 is replaced by the following:

   ‘E.3.2.

   Complexing agents^f3

   The following complexing agents are only permitted in products for fertigation and/or foliar application, except for Zn lignosulfonate, Fe lignosulfonate, Cu lignosulfonate and Mn lignosulfonate that can be applied directly to the soil.

   Acids, or sodium, potassium or ammonium salts of:

   For information only.
   No	Designation	Alternative designation	Chemical formula	CAS number of the acidf4
   1	Lignosulfonic acid	LS	No chemical formula available	8062-15-5

   ’;

5. (5)

   in Section F.1, the following entries are added:

   ‘

   2	Product containing dicyandiamide (DCD) and 1,2,4-triazole (TZ) EC# EINECS No 207-312-8 EC# EINECS No 206-022-9	Minimum 2,0 Maximum 4,0		Mixture ratio 10:1 (DCD:TZ)
   3	Product containing 1,2,4-triazole (TZ) and 3-methylpyrazole (MP) EC# EINECS No 206-022-9 EC# EINECS No 215-925-7	Minimum 0,2 Maximum 1,0		Mixture ratio 2:1 (TZ:MP)

   ’

6. (6)

   in Section F.2, the following entry is added:

   ‘

   2

   N-(2-nitrophenyl)phosphoric triamide (2-NPT) EC# EINECS No 477-690-9

   Minimum 0,04 Maximum 0,15

   ’