Annex V Minimum tier requirements for calculation-based methodologies involving Category A installations and calculation factors for commercial standard fuels used by Category B and C installations (Article 26(1))
United Kingdom
Table 1
Minimum tiers to be applied for calculation-based methodologies in the case of category A installations and in the case of calculation factors for commercial standard fuels for all installations in accordance with point (a) of Article 26(1); (‘n.a.’ means ‘not applicable’)
| Activity/Source stream type | Activity data | Emission factor | Composition data (Carbon content) | Oxidation factor | Conversion factor | |
|---|---|---|---|---|---|---|
| Amount of fuel or material | Net calorific value | |||||
| Combustion of fuels | ||||||
| Commercial standard fuels | 2 | 2a/2b | 2a/2b | n.a. | 1 | n.a. |
| Other gaseous and liquid fuels | 2 | 2a/2b | 2a/2b | n.a. | 1 | n.a. |
| Solid fuels | 1 | 2a/2b | 2a/2b | n.a. | 1 | n.a. |
| Mass balance methodology for Gas Processing Terminals | 1 | n.a. | n.a. | 1 | n.a. | n.a. |
| Flares | 1 | n.a. | 1 | n.a. | 1 | n.a. |
| Scrubbing (carbonate) | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| Scrubbing (gypsum) | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| Refining of mineral oil | ||||||
| Catalytic cracker regeneration | 1 | n.a. | n.a. | n.a. | n.a. | n.a. |
| Hydrogen production | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| Production of coke | ||||||
| Mass balance | 1 | n.a. | n.a. | 2 | n.a. | n.a. |
| Fuel as process input | 1 | 2 | 2 | n.a. | n.a. | n.a. |
| Metal ore roasting and sintering | ||||||
| Mass balance | 1 | n.a. | n.a. | 2 | n.a. | n.a. |
| Carbonate input | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| Production of iron and steel | ||||||
| Mass balance | 1 | n.a. | n.a. | 2 | n.a. | n.a. |
| Fuel as process input | 1 | 2a/2b | 2 | n.a. | n.a. | n.a. |
| Production or processing of ferrous and non-ferrous metals, including secondary aluminium | ||||||
| Mass balance | 1 | n.a. | n.a. | 2 | n.a. | n.a. |
| Process emissions | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| Primary aluminium production | ||||||
| Mass balance for CO2 emissions | 1 | n.a. | n.a. | 2 | n.a. | n.a. |
| PFC emissions (slope method) | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| PFC emissions (overvoltage method) | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| Production of cement clinker | ||||||
| Kiln input based | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| Clinker output | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| CKD | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| Non-carbonate carbon | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| Production of lime and calcination of dolomite and magnesite | ||||||
| Carbonates | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| Alkali earth oxide | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| Manufacture of glass and mineral wool | ||||||
| Carbonates | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| Manufacture of ceramic products | ||||||
| Carbon inputs | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| Alkali oxide | 1 | n.a. | 1 | n.a. | n.a. | 1 |
| Scrubbing | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| Production of gypsum and plasterboard: see Combustion of fuels | ||||||
| Production of pulp and paper | ||||||
| Make up chemicals | 1 | n.a. | 1 | n.a. | n.a. | n.a. |
| Production of carbon black | ||||||
| Mass balance methodology | 1 | n.a. | n.a. | 1 | n.a. | n.a. |
| Production of ammonia | ||||||
| Fuel as process input | 2 | 2a/2b | 2a/2b | n.a. | n.a. | n.a. |
| Production of bulk organic chemicals | ||||||
| Mass balance | 1 | n.a. | n.a. | 2 | n.a. | n.a. |
| Production of hydrogen and synthesis gas | ||||||
| Fuel as process input | 2 | 2a/2b | 2a/2b | n.a. | n.a. | n.a. |
| Mass balance | 1 | n.a. | n.a. | 2 | n.a. | n.a. |
| Soda ash and sodium bicarbonate | ||||||
| Mass balance | 1 | n.a. | n.a. | 2 | n.a. | n.a. |