# Commission Regulation (EU) No 65/2012 of 24 January 2012 implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards gear shift indicators and amending Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance), Division 4.2: Standard gear shift points

Extent: E+W+S+N.I.

Vn std shall denote the speed at which a typical driver is assumed to shift up from gear n into gear n + 1 without GSI recommendation. Based on the gear shift points defined in the type 1 emission test the following standard gear shift speeds are defined:
V0 std 0 km/h;
V1 std 15 km/h;
V2 std 35 km/h;
V3 std 50 km/h;
V4 std 70 km/h;
V5 std 90 km/h;
V6 std 110 km/h;
V7 std 130 km/h;
V8 std V#g GSI;
Vn min shall denote the minimum vehicle speed the vehicle can be driven in the gear n without stalling of the engine and Vn max the maximum vehicle speed the vehicle can be driven in the gear n without creating damage to the engine.
If Vn std derived from this list is smaller than Vn + 1 min, then Vn std is set to be Vn + 1 min. If Vn std derived from this list is greater than Vn max, then Vn std is set to be Vn max (n = 1, 2, …, #g – 1).
If V#g std determined by this procedure is smaller than V#g GSI, it shall be set to V#g GSI.

---
Source: https://www.legislation.gov.uk/eur/2012/65/annex/I/division/4/division/4.2 (the official version)
Page: https://openlegislation.uk/eu-regulation-2012-65/annex-I/division-4/division-4.2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.