Division 21.A.129 Obligations of the manufacturer

Each manufacturer of a product, part or appliance being manufactured under this Subpart shall:

1. (a)

   make each product, part or appliance available for inspection by the F1CAA;

2. (b)

   maintain at the place of manufacture the technical data and drawings necessary to determine whether the product conforms to the applicable design data;

3. (c)

   maintain the production inspection system that ensures that each product conforms to the applicable design data and is in condition for safe operation;

4. (d)

   provide assistance to the holder of the type-certificate, restricted type-certificate or design approval in dealing with any continuing airworthiness actions that are related to the products, parts or appliances that have been produced;

5. (e)

   establish and maintain an internal occurrence reporting system in the interest of safety, to enable the collection and assessment of occurrence reports in order to identify adverse trends or to address deficiencies, and to extract reportable occurrences. This system shall include evaluation of relevant information relating to occurrences and the promulgation of related information;

6. (f)
   1. 1..

      report to the holder of the type-certificate, restricted type-certificate or design approval, all cases where products, parts or appliances have been released by the manufacturer and subsequently identified to have deviations from the applicable design data, and investigate with the holder of the type-certificate, restricted type-certificate or design approval to identify those deviations which could lead to an unsafe condition;

   2. 2..

      report to the F2CAA the deviations which could lead to an unsafe condition identified according to point (1). Such reports shall be made in a form and manner F3established by the CAA under point 21.A.3A(b)(2) F4...;

   3. 3..

      where the manufacturer acts as supplier to another production organisation, report also to that other organisation all cases where it has released products, parts or appliances to that organisation and subsequently identified them to have possible deviations from the applicable design data.