Division 21.A.247 Changes in design management systemF1F2
United Kingdom
After the issue of a design organisation approval, each change to the design F3management system that is significant to the showing of compliance or to the airworthiness, operational suitability and environmental protection of the product, F4part or appliance shall be approved by the F5CAAF6before being implemented. An application for approval shall be submitted in writing to the CAA and the design organisation shall demonstrate to the CAA, on the basis of submission of proposed changes to the handbook, and before implementation of the change, that it will continue to comply with this Subpart after implementation.
Annotations
Textual amendments
- F1
- F2
Word in Annex 1 point 21.A.247 heading substituted (1.7.2024) by The Aviation Safety (Amendment) Regulations 2023 (S.I. 2023/588), regs. 1(3), 6(9)(d)
- F3
Word in Annex 1 point 21.A.247 substituted (1.7.2024) by The Aviation Safety (Amendment) Regulations 2023 (S.I. 2023/588), regs. 1(3), 6(9)(e)(i)
- F4
Words in Annex 1 point 21.A.247 inserted (1.7.2024) by The Aviation Safety (Amendment) Regulations 2023 (S.I. 2023/588), regs. 1(3), 6(9)(e)(ii)
- F5
Word in Annex 1 point 21.A.247 substituted (31.12.2020) by The Aviation Safety (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/645), regs. 1, 203(2) (with Sch. 3) (as amended by S.I. 2019/1098, regs. 1(3), 12); 2020 c. 1, Sch. 5 para. 1(1)
- F6
Words in Annex 1 point 21.A.247 inserted (1.7.2024) by The Aviation Safety (Amendment) Regulations 2023 (S.I. 2023/588), regs. 1(3), 6(9)(e)(iii)