Division 21.A.605 Data requirementsF1

The applicant shall submit to the F2CAA the following documents:

1. 1..

   a certification programme for the F3UKTSO authorisation, setting out the means to demonstrate compliance with point 21.A.606(b);

2. 2..

   a statement of compliance certifying that the applicant has met the requirements of this Subpart;

3. 3..

   a declaration of design and performance (DDP), stating that the applicant has demonstrated that the article complies with the applicable UKTSO in accordance with the certification programme;

4. 4..

   a copy of the technical data required in the applicable UKTSO;

5. 5..

   the exposition, or a reference to the exposition, referred to in point 21.A.143 for the purpose of obtaining an appropriate production organisation approval under Subpart G or the manual, or a reference to the manual, referred to in point 21.A.125A(b) for the purpose of manufacturing under Subpart F without production organisation approval;

6. 6..

   for an APU, the handbook, or a reference to the handbook, referred to in point 21.A.243 for the purpose of obtaining an appropriate design organisation approval under Subpart J;

7. 7..

   for all other articles, the procedures, or a reference to the procedures, referred to in point 21.A.602B(b)(2);

The applicant shall report to the F4CAA any difficulty or event encountered during the approval process that may significantly impact the F5UKTSO authorisation.