Division 21.A.609 Obligations of holders of UKTSO authorisationsF1

The holder of an UKTSO authorisation under this Subpart shall:

1. (a)

   manufacture each article in accordance with Subpart G or Subpart F that ensures that each completed article conforms to its design data and is safe for installation;

2. (b)

   prepare and maintain, for each model of each article for which an UKTSO authorisation has been issued, F2an updated set of complete technical data and records in accordance with point 21.A.5;

3. (c)

   prepare, maintain and update master copies of all manuals required by the applicable airworthiness specifications for the article;

4. (d)

   make available to users of the article and to the F3CAA on request those maintenance, overhaul and repair manuals necessary for the usage and maintenance of the article, and changes to those manuals;

5. (e)

   mark each article in accordance with point 21.A.807;

6. (f)

   comply with points 21.A.3A, 21.A.3B F4, 21.A.4 and 21.A.8;

7. (g)

   continue to meet the qualification requirements of point 21.A.602B.